Home Natural Gas And Lpg Sensor Gd-04A4 230V 1 Pc

Gas Sensor with Cable 230V/50Hz

✔️ The GD-04A4 gas sensor is used for continuous monitoring of the presence of explosive gases in the surrounding air and detection and alarming when the maximum safe concentration of such gases is exceeded.

✔️ It is intended for installations in closed rooms where there is probability of gas leakage from the installation or devices powered by it.

✔️ For proper operation, it does not require any other additional devices.

✔️ For its installation, one mains socket - 230V/50Hz is enough.

✔️ When the factory-set gas concentration 23% of LEL" is exceeded, optical and acoustic alarm signals are activated.

✔️ This solution increases the probability of protecting the user from the risk of poisoning or explosion of leaking gas.

✔️ Natural gas is a colorless gas, with a faint odor and lighter than air.

✔️ In combination with oxygen in air, it forms a flammable and explosive mixture.

✔️ The greatest hazard occurs when it is released from a tank or a leaking gas stove.

✔️ Ignition may occur from devices located above, e.g. a light switch.

• Types of detected gases: Natural gas / LPG

• Sensor life: 5 YEARS

• Power supply voltage: 230V

• Sensor power consumption in standby / alarm mode: 3W / 5W

• Operating temperature range: -10°C - +50°C

• Permissible relative humidity: 10% - 95%

• Min. gas concentration detection: 85dB/1m

• Sensor type: Semiconductor

• Sensor detection range: Approx. 20-25 m2

• Dimensions: 112x79x32 mm

• Mounting holes distance: 46 mm

In the selected place on the wall, through Mark the hole in the tab for the mounting pin.

For the most effective monitoring of gas presence in the air, the device should be installed at a height of:

• Natural gas: Approximately 50 cm below the ceiling

• Propane-butane gas (LPG): Approximately 30 cm above the floor

Color: nan Size: nan