Electric heating mat under tiles
Mission Air® MA-160
⭐SURFACE AREA: 2m²
⭐DIMENSIONS: 50cm x 4mb
⭐UNIT POWER: 160W/m²
⭐TOTAL POWER: 320W
Modern electric underfloor heating
Single-sided powered self-adhesive MissionAir® MA-160 heating mat with a power of 160W/m² is made of a thin heating cable, resistant to high temperatures.
The heating mat is designed for installation under ceramic, stoneware or stone tiles, directly in the adhesive layer under the tiles or in a layer of self-leveling screed.
Take care of your comfort
The use of the Mission Air® electric heating mat significantly improves the comfort of household members, providing the much-loved effect of a pleasantly warm floor.
Heating Mats MA-160 can operate as:
✅basic and independent heating system in a given room. For this purpose, it is recommended that the surface of the heating mats cover at least 2/3 of the entire room,
✅supporting heating, used, for example, to achieve a warm floor effect in a specific room.
⭐ Simple installation, not requiring major renovation work or many hours spent on the entire installation,
⭐ Low investment cost, especially compared to traditional water underfloor heating,
⭐Exceptional response efficiency compared to other heating systems. We don't have to wait for the stove to heat the water, which then releases heat into the room. The electric heating cable heats practically immediately after starting operation.
⭐Easy to operate.
⭐ The systemis environmentally friendly, noise-free, dust-free, and pollution-free.
⭐ The underfloor heating system ... Additionally, combined with a photovoltaic panel system, we can have virtually free heating in our home!
The MA-160 heating mat system is reliable, safe, and manufactured with durability and comfort of use in mind.
The approx. 3mm thick heating cable is attached to a fiberglass mesh. The mounting mesh is self-adhesive, covered with an adhesive layer on the underside. Simply unroll the mat in the desired location, gently press the mesh to the substrate, and you're done.
Installing the mat directly in the adhesive layer under the tiles allows for use in areas where raising the floor level is limited. This solution allows the MA-160 heating mat to be used not only in new construction, but also during renovations.
MA-160 mats are equipped with a 3m power cord.
For comfortable and safe use of the heating system, the mat must be connected to a room temperature controller, which will allow you to control the mat's operation.
1. Ceramic, stoneware, stone tiles
2. Flexible tile adhesive
3. Floor temperature sensor in a protective tube
4. MA-160 heating mat
5. Floor thermal insulation (optional)
6. Elastic adhesive for tiles
7. Floor screed
Cutting the heating mat
When planning the arrangement of the system in a given room, we can cut the mounting mesh as much as possible. Properly cutting the mesh allows us to adapt the heating mat to virtually any room shape.
4. Avoiding an obstacle
Note! Do not cut, shorten, or cut the heating cable. Only the mounting mesh needs to be cut.
Save with Mission Air®!
The constantly rising costs of traditional gas heating and the soaring prices of coal definitely speak in favor of electric heating based on heating mats.
Additionally, by using a home photovoltaic installation, we can achieve virtually free heating in our home!
Wide range of applications
MA-160 heating mats from MissionAir® can be installed in:
• sanitary facility
.... practically every room where floor tiles are planned.
Technical specifications of the MA-160 mat:
• heating surface: 2m²
• mat length: 4m
• System power:320W
• Unique power: 160W/m²
• Power supply voltage: 230V
• Power supply type: single-sided
• Supporting substrate: self-adhesive mesh
• Heating cable thickness: ⁓3 mm
• Power cable length: 3m
• Application: under ceramic, stoneware, and stone tiles
Choose high quality
In total, there are 20 sizes to choose from: from 0.5m² to 20m² of heating surface!
Frequently Asked Questions
Can the mat's heating cable be shortened?
The heating cable cannot be cut or shortened. The fiberglass mesh on which the heating cable is mounted can be cut.
Can the heating cables cross or touch each other?
The heating mat cables must not cross or touch each other. This may damage the insulation and the heating element.
Can the heating mat be installed under a shower tray, shower, or bathtub?
The heating mat should not be installed in places most exposed to moisture, such as under a shower tray, bathtub, or shower.
Can the heating mat be installed under furniture?
The heating mat can be installed under furniture that has legs at least 3 cm high and allows for free air circulation. The mat should not be installed under furniture that is flush with the floor. Thick carpets or pet beds should not be placed within the mat's application area.
Can the MA-160 heating mat be installed under floor panels?
The MA-160 heating mat should not be installed under floor panels. We install infrared heating foils or MAL-160 heating mats from Mission Air® under the floor panels.
Can the heating mat be connected to a socket?
The heating mat cannot be connected to the mains using a standard plug connection. The heating mat should always be connected to a room temperature controller/controller.
Does the electrical connection of the heating mat require special permissions?
The electrical connections of the heating mat must be made by a certified electrician, who will also perform the necessary electrical measurements of the heating mat and the electrical installation to rule out any faults and ensure safe operation of the heating system.
How can I check if the purchased heating mat is not damaged and is working properly?
To check if the heating mat is not damaged and is working properly, measure the resistance of the heating wire (details in the installation instructions).
What should I do if the heating mat was mechanically damaged during installation and does not work?
The heating mat should be dismantled and a new heating mat installed. Using a damaged mat is unacceptable.
Color: nan
Size: nan
Товар из Польши
Возврат по недоставке
