FIX LIQUID NAIL MOUNTING GLUE
..is an adhesive that you can successfully use when renovating or repairing something in your home.
Its wide range of applications makes it perfect for gluing various elements both indoors and outdoors.
The adhesive is ready for immediate use immediately after opening, has a paste-like consistency and is intended for finishing works in construction and households. Provides a durable, waterproof joint with excellent initial adhesion to typical substrates. After drying, the joint becomes white.
• Glue color: white
• Joint color after drying: colorless
• Consistency: paste
• Density: 1.2 ± 0.05 kg/L
• Open time of the adhesive: 10 minutes
• Initial setting time: 30 minutes
• Full setting time: 24 h
• Coverage: 1.5-3 m²/L depending on the type and porosity of the substrate
• Joint properties: flexible, water-resistant (class Water resistance D3)
• Joint tensile strength: 30 MPa (approx. 300 kG/cm²)
• Joint temperature resistance: from -15 ºC to +60 ºC
• Volume: 280 ml
• Gross weight: 450 g
• Height – 23.0 cm
• Height with dispenser – 33.5 cm
• Diameter – 4.9 cm
• wood-like materials,
• plastics, i.e. decorative ceiling and skirting boards, radiator screens, decorative tiles, wooden strips, ceiling lamps, floor and wall coverings, floor and wall panels, laminates etc.
• gypsum plasterboard,
• stone and other,
• porous surfaces
• for chipboard, fiberboard, composite boards, etc.
• Can also be used for gluing mineral wool and glass wool insulation.
For indoor and outdoor use.
The cartridge is equipped with a closing cap and a glue dispensing nozzle.
For convenient use of the glue, install the cartridge in a special cartridge squeezer
Possibility to purchase in bulk packaging
To purchase the entire package of sanitary silicone, enter the value 8 in the number of pieces field during the purchase transaction.
Collective packaging display parameters
• Quantity: 8 pcs.
• Gross weight: 3700 g
• Length: 21.5 cm
• Width: 11.5 cm
• Height: 24.5 cm
Instructions for use
• Glued surfaces should be cleaned of dust, leveled if possible, Degrease, e.g.
• Cut off the plastic tip (slightly above the thread) and install the dosing nozzle.
• Apply the glue through the dosing nozzle attached to the cartridge.
Temperature during work.
• Carry out the work at a temperature from +10 ºC to +25 ºC (temperature of the air, substrate, adhesive and glued elements).
• Apply the glue in spots or strips to the substrate or glued element.
• Additionally, apply a drop at the corners and ends of the glued elements.
• Connect and firmly press the glued objects together.
• The glued elements can be positioned without being torn off for 10 minutes after applying the adhesive.
• The joint reaches full strength after approximately 24 hours. After finishing work, close the adhesive container tightly.
Cleaning tools and dirty elements.
• Clean dirty tools and fresh stains with water.
• Dried glue can only be removed mechanically.
Color: nan
Size: 280 ml