Vidaron V17 Wood Impregnation Bleached Oak 2.5 1 Pc

VIDARON Protective and Decorative Film-Creating Impregnation

✔️ Protects against:UV, water and snow,

✔️ Coating resistant to:mold fungi, blue stain and algae,

✔️ Deeply penetrates and strengthens the wood,

✔️ Increased water resistance ‐ contains wax,

✔️ Enhances the beauty of the wood,

✔️ Recommended number of layers: 2,

✔️ Applying the second layer: min. after 12 hours,

Up to 11m²/l for one coat

Film-forming impregnator, designed to protect and decorate wood, both outdoors and indoors. It creates a special coating on the wood surface that protects against biocorrosion – blue stain, algae, mold fungi, and algae.

In combination with the colorless VIDARON Protective Impregnation, it provides full wood protection.

✔️ Garden Furniture

HOW TO USE

STEP 1 - Preparing the substrate

• Raw wood to be impregnated should be clean and dry, smooth, free of dust, grease and resin stains.

• The wood should be previously seasoned and dried, with a moisture content of no more than 20%; Damp wood will not absorb the impregnation.

• In order to give a nice appearance, highlight the wood grain, improve application properties, extend the durability of the impregnation and keep the surface clean, it is recommended to sand the wood along the grain with sandpaper of approx. 120-200 grit, and additionally polish the surface.

• The raw wood to be impregnated should be clean and dry, smooth, free of dust, grease and resin stains.

STEP II - Preparation of the product

• Before use, mix the product thoroughly to ensure a uniform consistency and color.

• Repeat mixing during application.

• Before use, mix the product thoroughly to ensure a uniform consistency and color.

In the case of non-standard applications (e.g. wooden materials used in roofing, exotic wood species, cork cladding, etc.), the use of the product should be consulted with the Manufacturer.

• apply at a substrate and ambient temperature from +5°C to +30°C and relative air humidity up to 65%,

• apply subsequent layers of the impregnation at 12-hour intervals,

• after a minimum of 7 days, the surface obtains its full properties usable,

• Leaving excess impregnation on the wood surface or not rubbing it thoroughly may result in the coating peeling during use.

DECLARATION OF COLOR CONFORMITY

However, we cannot guarantee their perfect reproduction. This also applies to the prints available on this website to an even greater extent. If in doubt, you can purchase color testers or special color samples for some products.

About the Brand

VIDARON is a brand offering a set of specialized products for wood protection and decoration with a wide range of applications. The VIDARON brand includes wood varnishes and impregnations: varnish stain, impregnation, acrylic varnish, nitro varnish, and others. Wood protection with VIDARON.

Capacity: 2.5 |Color: bleached oak Color: nan Size: L