Nobiles Latex Wall Paint 5 Autumn Pear 14 Matt 1 Pc

packaging: 5L AUTUMN PEAR

Thanks to their microporous structure, they allow walls to breathe. Light stains can be washed off.

- Water resistance:

-- withstands standard indoor air humidity.

- Mechanical resistance:

-- resistant to abrasion with a dry cloth,

-- resistant to gentle washing with water and detergent.

- Other:

-- good water vapor permeability ensuring the walls can breathe.

Remove any dirt with a soft sponge and water with dishwashing liquid for no longer than 15 minutes.

Scrub resistance according to PN-EN 13300:2002: Class 3

Scrub resistance according to PN-C 81914:2002: Type I

VOC content limit (cat.: A/a): 30g/l (2010): The product contains max. 29g/l VOC.

Drying time for a single layer, at a temperature of approx. +20 degrees C and relative humidity of approx. 50%, with good ventilation:

- for surface drying – 2 hours

- for applying the next layer – 2 hours

Reducing the temperature and/or increasing the humidity may extend the drying time.

Do not add foreign ingredients.

In the case of renovated substrates, the condition of the substrate should be assessed. If it is old, weathered, crumbling and dusty, it should be subjected to a construction expert's assessment.

Wash off any contaminants with water and detergent. Allow to dry.

Clean fungal surfaces with a putty knife and then apply a suitable fungicide.

Fill any unevenness and damage to the surface with a suitable filler, then level and smooth it.

- Dusty and highly absorbent substrates, e.g. gypsum substrates, pre-prime with Nobiles Nobigrunt primer.

- relative air humidity should be lower than 80%,

- brush: the best effect is achieved by using brushes with synthetic bristles,

- roller: the best effect is achieved by using rollers with a natural pile length of 10-18 mm,

- airless spraying: recommended device parameters:

- working pressure 180 [bar]

- nozzle diameter 0.015" / 0.38 mm (nozzle PAA515)

-- spray angle 50

Spraying parameters performed on GRACO devices, model STmax395. The selection of parameters for the spray method depends on individual needs and device characteristics and should be preceded by technical tests.

-- do not dilute the emulsion,

-- spread thoroughly until an even layer is obtained.

-- dilution max 3%, however, it is usually not necessary,

-- spread thoroughly until an even layer is obtained.

• EAN: 5904078078761

• Manufacturer code: nobiles

• Brand: Nobiles

• Package size: 5

• Type: wall|structural|other

Decorative effect: Matte Number of layers: 1-2 layers Thinner: Not used. Ready-to-use product Color: nan Size: L