Hammerite Straight Rust Paint For Metal, Hammerite, 1 Pc

Hammerite Prosto Na Rudzenie – hammered copper effect 0.7 l.

It can also be used to protect non-ferrous metals after proper priming.

Up to 10 years of rust protection!

No primer required

Can be applied directly to rust - just remove any loose rust residue

With synthetic waxes that further enhance the water-repellent effect

• Straight to Rust

Hammerite Straight to Rust - matte effect can be used on:

• Metal balustrades

• Metal gates

• Metal doors

• Metal fences

• Metal fences

• Withstands standard atmospheric humidity.

• Resistant to bending and impacts

• Withstands high temperatures: continuous up to +80°C, periodically up to +150°C (long-term exposure to temperatures above +50°C may cause color changes).

• Resistant to periodic exposure (splashes, splashes) to diluted acids and alkalis (concentration up to 10%),

• resistant to periodic exposure (splashes, splashes) of diesel fuels and gasoline,

• resistant to salt,

• the content of synthetic waxes enhances the water-repellent effect,

• does not flake or crack - the high elasticity of the coating makes it resistant to changes in the volume of metal under the influence of temperature.

The colors displayed on the website reproduce the actual shades as faithfully as possible. However, we cannot guarantee accurate reproduction, colors may vary depending on the settings and resolution of the screen.

The sequence of actions depends on the type and condition of the surface of the substrate.

• remove mechanically by grinding or chiseling directly the thick layer of rust,

• remove dust and debris.

• Remove the dust and debris.

• Roughen the surface using e.g. sandpaper,

• Remove the dust and dirt.

Removal of dirt, degreasing:

• Remove dirt from the metal surface using using Hammerite Solvent,

Galvanized steel, aluminum, chrome, brass, copper and stainless steel:

• Prime with a primer for non-ferrous metals.

Proper surface preparation is crucial to achieving the full protective properties of the coating. Dry sanding generates dust and dirt. We recommend using appropriate respiratory protection.

- the ambient temperature should be between +10°C and +25°C,

- relative air humidity should be lower than 80%,

The substrate temperature should be at least 3°C ​​higher than the ambient dew point.

- brush: the best effect is achieved by using brushes with natural or mixed bristles (a mixture of natural and synthetic fibers),

- roller: the best effect is achieved by using rollers with natural (mohair) or mixed (velour) fleece (a mixture of natural and synthetic fibers) with bristles up to 8 mm long.

Color: nan Size: nan