Drewnochron Extra Film-Forming Wood Impregnation 4.5L Japanese Cherry 1 Pc

Extra Film-forming Impregnator

• Aqua Stop System - perfect protection against water

• No. 1 on the Polish market

• Waterproof coating, resistant to rain, snow and sun

• Wood protection against UV radiation

• Optimal adhesion to wood

• Preserves the natural wood grain

• Does not cause corrosion when connecting wood with metal elements (e.g. nails, metal fittings)

• Coating protected against mold and algae

• Recommended number of layers: 2

• 7 years of coating protection*

* for vertical surfaces, depending on the operating conditions

Aqua Stop System

is a technology based on the use of special, water-repellent oligomeric particles, thanks to which the wood surface is perfectly protected against the penetration of water, which easily flows off the coating. The coating is protected against mold and algae.

Extra Film-forming Impregnation

When applied to raw wood, it requires priming with Drewnochron Impregnat Grunt R, which provides full biological protection of the wood.

• Dirty surfaces should be sanded and dusted.

• Raw wood should be primed with Drewnochron Impregnat Grunt

• Color uniformity is achieved after thoroughly mixing the product.

• Drewnochron Impregnation is applied with a brush.

• To obtain the best and long-lasting biological protection of raw wood, apply 1 to 2 layers of Drewnochron Impregnation Grunt R, followed by 2 layers of Extra Film-Forming Impregnation. Impregnation should be carried out at a substrate and ambient temperature of +5 to +30 °C.

Increased humidity and low temperature extend the drying time.

• The final decorative effect depends on the type of wood and the number of layers of Extra Film-Creating Impregnation applied.

• Cleaning tools: Use EKO-1 thinner to clean brushes.

Capacity: 4.5L | Efficiency:up to 12m2/l | Color: Color: nan Size: 5l