packaging: 5L
Product recommended by the Polish Society of Allergology.
- Provides a beautiful, matte finish
- Highest resistance to wet scrubbing - class 1 (PN-EN 13300)
- Creates a coating resistant to washing with water and detergent
- Distinguished by good coverage and color durability
- Does not emit an unpleasant odor during application and drying
- Additionally, it meets stringent European standards regarding the emission of Volatile Organic Compounds – 0% VOC*.
*marked according to the PN-EN ISO 11890:2 standard
- according to the PN-EN 13300 standard - class 1
Leave at least 4 hours between applying subsequent layers. Low temperature, increased humidity, and poor ventilation extend the drying time.
To fill holes and cracks in the surface and to level the surfaces of walls and ceilings, use appropriate putty. Prime the entire surface with BECKERS DESIGNER PRIMER. In the case of loosely bound and absorbent substrates, protect the surface with BECKERS MAX PRIMER before priming.
Depending on the absorbency of the substrate, apply two coats of BECKERS DESIGNER COLOUR using a brush, roller, or spray. For colors with particularly poor covering power, additional coats may be necessary.
Note! If you use multiple packages of the same color but from different production batches, mix them in a larger collective package.
Stain and Dirt Removal
For best results, read the dirt removal instructions.
1. Remove dirt within 15 minutes of its appearance on the surface.
3. Use a clean, soft cloth (preferably cotton or microfiber).
4. Dampen the cloth with warm water without added detergent.
5. Gently wipe the dirt and allow it to dry. It is recommended to rinse the cloth frequently in clean water when removing dirt.
6. If traces of dirt are still visible on the surface, wash the surface again using a mild detergent (e.g. dishwashing liquid) and allow it to dry. It is recommended to rinse the cloth frequently when removing dirt.
7. Remove dirt without using excessive force. Do not rub in dirt.
- Do not use strong detergents.
change in the gloss level).
- Hydrophobic effect is only visible on completely dry coatings.
- The smoothness of the substrate has a significant impact on the removal of stains and dirt; the rougher and more uneven the surface, the more difficult the removal of stains and dirt.
Gloss level: Matt [5]
Theoretical coverage: up to 16 m²/l with a single coat. Coverage largely depends on factors such as absorbency, substrate texture, application method and color.
Cleaning tools: Tools should be cleaned with water immediately after finishing work.
Methods: Brush, roller, spray.
Dilution: If necessary, dilute up to 5% with water.
Color: nan
Size: 5l