Rubin waterproofing spray for shoes, jackets, backpacks 400ml.
The original "Made in Germany"
Rubin waterproofing spray 400ml for leather and textile shoes with and without membranes, for jackets with all types of membranes.
No more wet shoes and stains from dirt and salt. Your expedition jacket will regain its former water repellency.
The impregnation spray comes in an efficient 400ml container in the form of a colorless spray. It helps with quick and easy impregnation; it protects fibers from dirt and moisture. It can be used on clothing, footwear, backpacks, etc.
400 ml of the product is sufficient for approximately 7 m2.
The impregnation spray protects all textiles - shoes and jackets - natural leather - shoes and leather goods - from external environmental influences such as moisture, water, and dirt.
It is also suitable for use on backpacks, bags, umbrellas, tents, and convertible car roofs made of fabric.
The material continues to breathe and is not damaged by environmental influences. Easy and quick impregnation.
Not suitable for artificial leather or patent leather.
Rubin 400ml impregnator for leather, fabrics, synthetics, and clothing with a membrane. Long-lasting protection against moisture and dirt.
Rubin 400ml impregnator spray is intended for impregnating footwear, clothing, e.g. jackets, backpacks, and bags, clothing made of smooth leather, rawhide - wild animal skin, nubuck, velour, or fabrics. The special formula provides optimal protection against moisture and dirt.
Rubin 400ml impregnation agent can also be used to preserve synthetics and clothing with a climate membrane.
Preparation and Application
Shake the can before use. Use only outdoors or in well-ventilated areas.
Before using the impregnation agent, clean the material of any remaining dust and dirt. Test on a sheltered area. Spray evenly on a clean and dry material from a distance of 30 cm, taking care not to soak the material. Several thin layers give better results than one thick one.
Do not rub damp leather. Wait for the material to dry completely.
Respray areas exposed to strong external factors. If necessary, polish the preserved leather surface and brush the suede. To ensure optimal protection, apply the impregnation regularly, especially after washing the material.
400 ml of the product is sufficient for approximately 7 m2.
Tips and limitations of use.
Check the material's strength in an inconspicuous area. Do not spray on sensitive materials such as varnished surfaces, rubber, or wood.
Light leather may darken. Spray large-format leather and textile products only outdoors. Spraying too close may lead to local discoloration.
Not suitable for artificial leather or patent leather.
Contains isopropyl acetate. Extremely flammable aerosol. Pressurized container: may burst if heated. Causes skin and eye irritation. Toxic to aquatic life with long-lasting effects. May cause drowsiness or dizziness.
Keep out of reach of children. Avoid inhalation of spray. Do not eat, drink, or smoke while using the product.
Spray only for a few seconds. Dispose of container into special waste containers. Use only outdoors or in a well-ventilated area. Do not spray for more than a few seconds. For large leather and fabrics, use the preparation only outdoors and allow it to air dry.
May burst if heated. Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Do not spray on an open flame or other ignition source. Keep away from heat/sparks/open flames/hot surfaces.
No smoking.
Contains: hydrocarbons, C7 - C9, n-alkanes, cyclic isoalkanes, C6 - C7 hydrocarbons, n-hexane, isopropyl acetate.
If product gets into eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing.
Color: nan
Size: 400ml
Товар из Польши
Возврат по недоставке
