Emergency Pipe and Pipeline Repair Kit with Drinking Water Approval
WEICON Pipe Repair Kit 5/15 is a ready-made kit for the quick emergency repair of damaged pipes and pipelines. Designed for situations where time is of the essence, simplicity of operation, and the ability to perform effective repairs without extensive tooling are essential.
This solution is useful when you need to quickly stop a leak, seal the leak, and return the installation to service.
The greatest strength of this kit is its combination of ease of use and real effectiveness in service conditions. The tape activates upon contact with water, adapts well to the repaired area, and reaches full strength after 30 minutes.
Additionally, the kit is approved for contact with drinking water, so it can also be used where this parameter is crucial.
WEICON Pipe Repair Kit 5/15 is used for emergency repairs of damaged pipes and lines in various industries. It is suitable for water, gas, and chemical pipelines, as well as anywhere a quick repair is needed without time-consuming dismantling of the installation.
It is particularly suitable for leaks at bends, T-connections, and in hard-to-reach places. It is in these applications that the kit demonstrates its greatest advantage over solutions that only work well on straight sections.
Thanks to the elasticity of the tape and easy application, you can effectively seal the damaged area even where classic repair methods are inconvenient or too slow.
What's included in the kit
WEICON Pipe Repair Kit 5/15 is not just a repair tape. This complete kit contains everything you need for a quick emergency repair.
WEICON Repair Stick Multi-Purpose is used to pre-seal the leak.
The special repair tape is made of glass fibre reinforced plastic and impregnated with water-activated resin.
Assembly instructions help you carry out the repair step by step.
Protective gloves facilitate safe and comfortable application.
What distinguishes WEICON Pipe Repair Kit 5/15
The most important advantage of this product is that it allows you to perform a permanent emergency repair without additional tools. This is especially important in service situations where there is no time for extensive site preparation or access to the damaged area is limited.
The kit also stands out for its high resistance to pressure and chemicals, as well as heat resistance up to +150°C. An additional advantage is that it can be used on many materials, such as stainless steel, aluminum, copper, PVC, many plastics, fiberglass, concrete, ceramics, and rubber.
How to use WEICON Pipe Repair Kit 5/15
Before starting the repair, depressurize the pipe and prepare the surface properly. The damaged area should be clean, dry, and degreased. Remove any rust, remnants of old coatings, oil, grease, dust, and other contaminants that could impair adhesion.
On very smooth or heavily soiled surfaces, it is advisable to additionally matt or roughen them.
After preparing the surface, portion and knead WEICON Repair Stick, then pre-seal the leak. The next step is to soak the repair tape in clean water and wrap it around the leak. The tape should be thoroughly wet while wrapping.
The manufacturer states that the repair regains its full strength after 30 minutes.
Technical Data WEICON Pipe Repair Kit 5/15
Parameter | Value
Brand | WEICON
Product Name | Pipe Repair Kit 5/15
Article Number | 10055737
Product Type | Emergency Pipe and Pipeline Repair Kit
Tape Dimensions | 150 cm x 5 cm
Color | Old White
Drinking Water Approval | NSF ANSI 61
Tape Base | Polyurethane
Tape Open Time at 20°C | 3-5 min
Tape Initial Strength | 7-10 min
Tape Final Strength | 30 min
Tape Tensile Strength | 35 MPa
Tape compressive strength | 30 bar
Tape hardness | Shore D 70
Tape thermal resistance | Up to +150°C
Stick base | Epoxy resin
Consistency Stick | Filling mass
Stick application temperature | +15°C to +40°C
Maximum gap | 15 mm
Final strength of the stick | 24 hours
Minimum storage period | 24 months
Kit Contents | Repair Stick Multi-Purpose glass fiber reinforced tape, installation instructions, protective gloves
The kit should be stored in a dry place at room temperature. Unopened packages can be stored between +18°C and +25°C. Avoid exposure to sunlight.
Is this kit suitable for repairing drinking water pipes?
Yes. WEICON Pipe Repair Kit 5/15 is NSF ANSI 61 approved and can therefore also be used for drinking water applications.
Are additional tools required to use the kit?
No. This is one of the main advantages of this solution. The kit is designed to enable quick repairs without additional tools.
How long does it take for the repair to reach full strength?
The manufacturer states that the tape regains its full strength after 30 minutes of application.
What exactly is included in the kit?
The kit includes WEICON Repair Stick Multi-Purpose, a special fiberglass-reinforced repair tape, installation instructions, and protective gloves.
What surfaces can this kit be used on?
The kit can be used on stainless steel, aluminum, copper, PVC, many plastics, fiberglass, concrete, ceramics, and rubber, among others.
Color: nan
Size: 150 cm