Hylomar Exhaust Assembly Paste, an assembly paste for exhaust systems, resistant to 1000°C.
Hylomar Exhaust Assembly Paste 500 g is a water-based, asbestos-free assembly paste designed for assembling and sealing connections in exhaust systems. The product was developed for automotive and general technical applications where exhaust connections must withstand high temperatures, pressure, and vibrations.
This is a practical solution for assembling pipes, mufflers, connectors, elbows, and other exhaust system components.
Applications of Hylomar Exhaust Assembly Paste 500 g
Hylomar Exhaust Assembly Paste is used as an assembly paste for connections in exhaust systems. The product is suitable for areas where both assembly lubrication and subsequent sealing of the joint are required during assembly after the system has been started and warmed up.
Typical applications include exhaust pipe joints, connectors, elbows, mufflers, and other components installed in exhaust systems. The paste can be used in passenger cars, vans, trucks, and in general technical applications where exhaust joints are exposed to temperature and vibration.
What distinguishes Hylomar Exhaust Assembly Paste?
The product's most important feature is its combination of assembly and sealing functions. The paste lubricates joints during assembly, making assembly easier and faster, and hardens after the engine warms up, creating a tight joint resistant to typical exhaust system operating conditions.
Hylomar Exhaust Assembly Paste is a water-based product, asbestos-free, and according to the manufacturer, can withstand operating temperatures up to 1000°C.
When to choose Hylomar Exhaust Assembly Paste
Choose Hylomar Exhaust Assembly Paste when assembling or assembling exhaust system components and want to reduce the risk of leaks at joints. This product is particularly useful where the connection must be tight, but at the same time the components require easier fit during assembly.
This is a paste for assembling and sealing joints, not a compound for rebuilding damaged sections of the exhaust pipe. If the problem is a hole, crack, or material loss, consider a product designed for exhaust system repair, not just a joint assembly paste.
How to use Hylomar Exhaust Assembly Paste
The surfaces to be joined should be clean, free of loose rust, dirt, and grease. The manufacturer recommends sanding the surface with medium-grit sandpaper to improve application site preparation.
The paste should be applied liberally to all system connections, and then the components should be assembled immediately after application. After assembly, run the engine at low speed and allow the system to warm up. The paste hardens under the influence of heat, creating a gas-tight seal.
Do not run the engine in enclosed or poorly ventilated spaces. When working on the exhaust system, consider the risk of high component temperatures and the presence of exhaust gases.
What to pay attention to before use
This means that the joint achieves a proper seal after assembly and heating of the exhaust system. The product is not a structural adhesive and does not replace the mechanical fastening of components.
The paste is intended for joints and assembly connections in exhaust systems. It should not be considered a universal repair compound for large defects, perforations or cracks in exhaust components.
Technical data Hylomar Exhaust Assembly Paste 500 g
Parameter | Value
Product | Hylomar Exhaust Assembly Paste
Product code Melkib | MB-0212
Product type | Assembly paste for exhaust systems
Packaging capacity / weight | 500 g
Packaging | 500 g cartridge
Formula | Water-based
Color / Appearance | Beige / Light Brown
Specific Gravity @ 20°C | 1.89 according to ASTM D4659
Service Temperature | Up to 1000°C
Applications | Assembly and sealing of joints in exhaust systems
Typical Applications | Exhaust pipes, mufflers, connectors, elbows and other exhaust system connections
Asbestos | Asbestos-free product
Cleaning of tools after application | Water or detergent solution, according to the manufacturer's TDS
CLP classification according to SDS | H315: Causes skin irritation; H319: Causes eye irritation
SDS signal word | Warning
Store in a dry and well-ventilated place at temperatures between 5°C and 25°C. The product should be protected from frost, strong sunlight, and excessive heat. The packaging should be tightly closed when not in use.
Is Hylomar Exhaust Assembly Paste suitable for muffler assembly?
Yes. The product is intended for assembling and sealing connections in exhaust systems, including connectors, pipes, and muffler components.
Not in the traditional way. After assembly, the exhaust system must be heated so that the paste bonds and forms a gas-tight seal.
Does the product withstand high temperatures?
Yes. The manufacturer states an operating temperature of up to 1000°C, which corresponds to the demanding conditions typical of exhaust systems.
Does Hylomar Exhaust Assembly Paste contain asbestos?
No. According to the manufacturer, the product has an asbestos-free formula.
Will this paste repair a hole in the exhaust pipe?
It is an assembly paste for joints and connections, not a mass for rebuilding large defects. For holes, perforations, or cracks, a repair product designed for this type of damage should be selected.
Does the surface need to be prepared before application?
Yes. Surfaces should be clean, free of loose rust, dirt, and grease. The manufacturer recommends sanding the application area with medium-grit sandpaper.
Does it need to be assembled immediately after applying the paste?
Yes. The manufacturer recommends applying the paste to the joints and assembling the elements immediately after application.
How should I clean the tools after using the paste?
According to the manufacturer's TDS, the tools used for application can be cleaned with water or a detergent solution.
Color: nan
Size: 500g
Товар из Польши
Возврат по недоставке
