Loctite Mr 5972 200 Grey, Viscous, Single-Component Sealing Mass, High Temperature Up To 315°C, For Sealing Gaskets, Threads, Flange Joints

Loctite MR 5972 is a single-component, gray, slow-drying, high-viscosity paste. It remains flexible and pliable. The product has a wide operating temperature range from -45°C to +315°C. It can be applied to cork, paper, plastics, and metal surfaces to seal the joint.

• Sealing mechanical seals (paper, cork, etc.)

• Sealing flange joints

• Sealing threaded joints

• Heating systems

• Pipe joints

• Steam installations

• Gearboxes, covers

• The agent is reliable at high temperatures

• Shortens repair time

• Reduces the number of failures by compensating for relaxation in all types of mechanical seals and fills all micro-pores of the part (most often metals), thereby increasing the tightness of the entire part.

• resistant to many media, including oils, fuels, lubricants and chemicals

• seals installations with pressure up to 34 MPa

-45°C to +315°C

from 3 to 5 hours

Maximum pressure in sealed installations

Instructions for use

1. If possible, clean, degrease and dry the elements.

2. Apply to both surfaces. Can be spread with a spatula.

3. After application, immediately connect the two components.

4. Secure and press, tighten to the recommended torque.

5. Set time: 3 to 5 hours.

Ideally, store it in closed containers in a cool, dry place at a temperature between +8°C and +28°C. The optimal temperature is the lower half of this range. Do not return leftover product to the original container to avoid contaminating the remaining material.

Color: nan Size: 200 g