Qs Electronic Qs8 Anti-Spark High Current Connector - Male + Female Set, 110 A, 500 V Dc

QS Electronic QS8-S Anti-Spark 110A Connector

The QS Electronic QS8-S is a two-pin high-current connector designed for connecting batteries, ESCs, drones, RC models, and other high-current power systems. The set includes a male and female part, allowing for a complete connection on both sides of the system.

The Anti-Spark function reduces sparking when connecting the power supply. The rated current is 110A, and the maximum current specified by the manufacturer is 180A. The connector is designed for wires with a cross-section of 8-12 AWG.

Who is this kit for?

• I am building a power system for a large drone, RC model, or electric vehicle

• I need a complete male and female connector for 8-12 AWG wires

• I want to reduce sparking when connecting the battery

Who is NOT this kit for?

• My installation uses a different connector standard, e.g., XT60, XT90, or AS150

• I am using wires thinner or thicker than the 8-12 AWG range

• I need a multi-pin connector to transmit additional signals

• 110A rated current - the connector is designed for high-load power supply installations

• Maximum current 180 A - provides a margin compared to the rated value

• Anti-Spark function - limits sparking when connecting the power supply

• Gold-plated contacts - low connection resistance, maximum 0.51 mOhm

• PA UL94 V-0 housing - material with increased ignition resistance

• Wire covers - protect soldering points after assembly

• Manufacturer: QS Electronic

• Model: QS8-S

• Type: high-current Anti-Spark connector

• Number of pins: 2

• Current rated current: 110 A

• Maximum current: 180 A

• Nominal voltage: 500 V DC

• Contact resistance: max. 0.51 mOhm

• Insulation resistance: min. 500 MOhm

• Wire range: 8-12 AWG

• Electrical assembly: soldering

• Contact material according to datasheet: Cu

• Contact plating: gold, 1.5 um

• Housing material: PA

• Material flammability class: UL94 V-0

• Operating temperature: from -20°C to +120°C

• Mechanical durability: up to 3000 connection cycles

• Connection and disconnection force: 7-30 N

• 1x QS8-S male connector

• 1x QS8-S female connector

• 2x solder joint cover wires

Frequently Asked Questions

Does the offer include a male and female set?

Yes. The set includes one male part, one female part, and solder joint covers.

What wires can be soldered to the QS8-S?

The manufacturer states a range from 8 AWG to 12 AWG. The cable should also be selected for the current in the specific installation.

What current does the QS8-S connector support?

The rated current is 110 A, while the maximum current specified in the manufacturer's data sheet is 180 A.

Avifly expert tip: When soldering 8-12 AWG wires, use a soldering iron with a large tip and adequate power reserve. Replace the cable sheath before soldering, as it will not be possible to insert it from the cable side once the connection is made. Color: nan Size: nan