Flyfish Volador Ii Vd5 Deadcat Fpv Frame 5" T700 Black

FlyFish Volador II VD5 Deadcat FPV Frame 5" T700

is a 5-inch frame in a Deadcat configuration (without propellers in frame), made of high-quality T700 carbon fiber, designed for the DJI O4 Pro Air Unit system.

Thanks to its tight construction to minimize resonance, a silicon anti-vibration insert for the camera, and an integrated XT60 connector,

the Volador II VD5 is an armored platform for both freestyle pilots and operators recording HD footage.

The V2 version offers significantly reduced weight and a number of improvements based directly on feedback from V1 generation pilots.

Key Features and Benefits

• Premium T700 Carbon Fiber with Thick 6mm Arms: Ultra-lightweight design withstands the heaviest impacts (bando bashing) - 6mm thickness on the arms ensures crash resistance without adding excessive weight.

• Silicon Anti-Vibration Insert for the DJI O4 Air Unit Camera: Eliminates the jello effect in DVR recordings - the image remains stable even during aggressive full-throttle flight. Throttle.

• Integrated XT60 connector at the rear of the frame: The power cable is tucked away from the propellers, protecting it from being cut during a crash and allowing one-handed battery connection.

• 12.9 grade screws with pre-applied Loctite: Uncompromising reliability of mechanical connections – screws do not loosen under the influence of vibration, even after repeated impacts.

• Structurally tight, independently removable arms: The tight assembly structure reduces frame resonance to a minimum, and replacing a damaged arm does not require disassembling the entire stack.

• Innovative anti-slip battery mat with mesh and stronger adhesive: The battery remains securely locked during the toughest maneuvers, without additional cable ties damaging the battery wrap.

• Deadcat configuration with 19/20mm camera compatibility: A clean, propeller-free frame in every shot and full flexibility for mounting popular analog and digital HD cameras – plug-and-play without searching for adapters.

• High-quality TPU elements (arm covers, antenna mounts with GPS option): The set includes two types of antenna mounts (with or without GPS mount), allowing for clean and organized outdoor installation without cables.

Parameter | Value

Material | T700 Carbon Fiber

Configuration | Deadcat (VD5)

Propeller Size | 5 – 5.1 in

Wheelbase | 225 mm

Overall Dimensions | 190 mm × 136 mm

Weight (with TPU parts) | 186.4 g

Arm Thickness | 6 mm

Top Plate Thickness | 2.5 mm

Mid Plate Thickness | 2.5 mm

Bottom Plate Thickness | 2.5 mm

Wedge (Keystone) Thickness | 5 mm

Side Plate Thickness | 2 mm

CNC Side Plate Thickness | 5 mm

Stack Mounting Holes (FC/ESC) | 20 × 20 mm / 30.5 × 30.5 mm (M3)

VTX Mounting Holes | 20 × 20 mm / 25.5 × 25.5 mm (M2)

Motor Mounting Holes | 16 × 16 mm (φ3 mm)

FPV Camera Hole Spacing | 19 mm / 20 mm

Screw Grade | 12.9 (with pre-applied Loctite)

HD System Compatibility | DJI O4 Pro Air Unit

Analog Compatibility | Yes (19/20 mm cameras)

Available Colors | Black

• FlyFish Volador II VD5 Deadcat FPV Frame 5" T700 Black x1

Avifly Expert Tip: The Deadcat configuration with 225mm spacing allows you to easily mount a standard 30.5x30.5mm stack (the most popular size on the market) – however, when choosing an FC, make sure it supports a Blackbox gyro with at least 4kHz sampling to fully benefit from the stiffness of the T700 boards and eliminate any possible oscillation in loops. The integrated XT60 connector is mounted on one side – plan your stack's wire routing before you clamp the top plate, which will save you disassembly later. Color: nan Size: nan