Amass 20 AWG Silicone Wire 0.50 mm²
Amass 20 AWG silicone wire with a cross-section of 0.50 mm² is a very soft wire designed for signal, control, and power connections for low-power electronics. The conductor consists of 100 thin strands of tinned copper with a diameter of 0.08 mm, making the wire flexible and easy to route in tight spaces.
The auction is for 1 meter of wire. Purchasing several pieces means a correspondingly longer section prepared in one piece, if the available roll stock allows.
Who is this cable for?
• For signal and power connections in electronics
• For powering receivers, sensors, modules, LED lighting and small devices
• For wiring RC models, FPV drones, robots and mobile devices
• For installations exposed to vibrations, shocks and frequent bending
Who is NOT this cable for?
• For main power cables for large motors, controllers and high-current batteries
• For installations requiring a load higher than specified
• For connections requiring a wire with a larger mechanical cross-section
• Cross-section 0.50 mm² - suitable for signal connections and powering low-power electronics
• 100 strands with a diameter of 0.08 mm - high flexibility and resistance to repeated bending
• Tinned copper - easier soldering and reduced oxidation of the conductor surface
• Very soft silicone insulation - easy cable routing inside small devices
• Outer diameter 1.80 mm - low space requirement in the wiring harness
• Rated voltage 600 V - insulation parameter given for the entire series
• Operating temperature up to +200C - insulation adapted to work at elevated temperatures
• White color
• Brown color
Parameter | Value
Brand | Amass
Cable Size | 20 AWG
Conductor cross-section | 0.50 mm²
Conductor material | Tinned copper
Conductor construction | 100 strands of 0.08 mm each
Conductor diameter without Insulation | 0.92 mm
Outer diameter with insulation | 1.80 mm
Insulation material | Extra soft silicone
Rated voltage | 600 V
Operating temperature | Up to +200C
Conductor resistance | 40.2 Ohm/km
Recommended load | 3.02 A
Environmental compliance | RoHS, REACH, Halogen Free
Available colors | White, brown, black, red, purple, blue, yellow, green
Sales unit | 1 piece = 1 meter
• 1 m of Amass 20 AWG 0.50 mm² silicone cable in the selected color
Frequently asked questions
Does one piece mean one meter of cable?
Yes. One piece corresponds to one meter of cable. When purchasing multiple pieces, the cable is prepared as one longer section, provided the available roll capacity allows.
Is 20 AWG cable suitable for RC models and FPV drones?
Yes. It can be used for power and control connections in RC models, FPV drones, robots, and electronic devices, as long as the current draw is within the cable's parameters.
Can the cable handle a load of 3.02A?
The specification states a recommended load of 3.02A. The actual allowable current also depends on the cable length, routing, temperature, cooling, and the quality of the connectors and connections used.
Avifly Expert Tip: When soldering 20 AWG wire, tin the tip before connecting to the connector or pad. This will reduce delamination of the thin strands and shorten the heating time.
Color: nan
Size: nan
Товар из Польши
Возврат по недоставке
