200A Industrial Solid State Relay 4 to 32VDC Input 30 to 450VAC Output 2500V Insulation Withstand Voltage Industrial SSR

200A Industrial Solid State Relay 4 to 32VDC Input 30 to 450VAC Output 2500V Insulation Withstand Voltage Industrial SSR Stable Current: Excellent power cycle capability and temperature characteristics, stable trigger current, better protection of electrical appliances, and higher isolation voltage. 2500V Insulation Withstand Voltage: Photoelectric isolation between the input and output circuits of the Industrial relay, insulation withstand voltage 2500V, input 4 to 32VDC, output 30 to 450VAC. LED Work Indication: LED work indication, which is convenient for you to observe its status. The interior is filled with epoxy resin, which is shockproof, moistureproof and corrosionproof. Internal Working Method: Industrial SSR adopts internal working method, no internal contact work, no mechanical contact, rejecting spark generation from the source. Aluminum Base Plate: 200A industrial SSR aluminum base plate, good thermal conductivity, faster heat dissipation, long service life, more safety and stability. Feature:1. Stable Current: Excellent power cycle capability and temperature characteristics, stable trigger current, better protection of electrical appliances, and higher isolation voltage.2. 2500V Insulation Withstand Voltage: Photoelectric isolation between the input and output circuits of the Industrial relay, insulation withstand voltage 2500V, input 4 to 32VDC, output 30 to 450VAC.3. LED Work Indication: LED work indication, which is convenient for you to observe its status. The interior is filled with epoxy resin, which is shockproof, moistureproof and corrosionproof.4. Internal Working Method: Industrial SSR adopts internal working method, no internal contact work, no mechanical contact, rejecting spark generation from the source.5. Aluminum Base Plate: 200A industrial SSR aluminum base plate, good thermal conductivity, faster heat dissipation, long service life, more safety and stability.Specification:Item Type: 200A Industrial Solid State RelayMaterial: ABS, AluminumModel: For H3200ZFControl Mode: DC Control ACWork Indication: LEDAmbient Temperature: -20C~75℃Installation Method: Stud FixingInput: 4-32VDCOutput: 30-450VACInput ParametersControl Voltage Range: 3-32VDCMinimum Control Current: 5mAMaximum Control Current: 15mAMake Sure to Turn on the Voltage: 3.5VDCEnsure Shutdown Voltage: 1.5VDCOutput ParametersOutput Voltage Range: 24-480VACMaximum Load Current: 200ASummit Voltage: 1200VACInsulation Resistance: 1000MΩ/500VDCLeakage Current in OFF State: ≤2mA rmsSaturation Voltage Drop in ON State: ≤1.5VOn Off Response Delay: ≤10msGeneral Features:Insulation Withstand Voltage Between Input and Output: 2500V rmsInsulation Withstand Voltage Between Input and Output and Shell: 4000V rms.Package List:1 x200A Industrial Solid State RelayNote:1.When selecting the relay, please pay special attention to the operating current of the load and the ambient temperature, and add sufficient heat sink or take other effective heat dissipation measures when the load is working.2.The heat generated by the relay needs to be dissipated through the metal base plate of the relay, please pay attention to the installation of the relay and the heat sink with a close fit, the installation should be secure and the joint appearance should be coated with heat conductive silicone grease.3.When the output terminal is loosely connected to the load line, the heat generated during power on will cause the product to burn. The following is the recommended installation of screws for product wiring: M4 screws with a Torsional momentof 0137 1.7N m, M8 screws with a Torsional momentof 1.77 2.17N m. Excessive Torsional moment will damage the relay.4.50A or more (including 50A) are enhanced solid state relays.