Front Brake Discs + Pads 201801390

Product code:201801390P

TECHNICAL DATA:

Mounting side: Front axle

Quantity unit: Set

Disc:

• Brake disc type: ventilated • Outer diameter [mm]: 238 [mm] • Brake disc thickness [mm]: 18.0 [mm] • Height [mm]: 46.2 [mm] • Hole Ø [mm]: 12.5 [mm] • Minimum thickness [mm]: 16.0 [mm] • Inner diameter [mm]: 130.0 [mm] • Number of holes: 4 • Centring hole diameter [mm]: 59.0 [mm] • Hole spacing Ø [mm]: 100.0 [mm]

Block:

• Thickness [mm]: 15.0 [mm] • Width [mm]: 120.8 [mm] • Height [mm]: 45.0 [mm] • Braking system: Akebono • Wear warning contact: without wear contact • Wear warning contact: not prepared for wear indicator • Additional information: with damping pad

The best quality at a surprising price from Master-Sport Germany!

Master-Sport braking systems are characterized by excellent parameters:

• Optimal selection of the mixture of the material from which they are made • They absorb vibrations thanks to the use of an Anti-Noise pad • Excellent heat dissipation thanks to appropriate selection of the pad base alloy • Non-flammable mixture ensures dampening of vibrations and squeaks • High-quality cast iron used for the production of discs • Discs balanced at the end of the production process • Discs ground on both sides

BRAKE CLEANER 912001500

Brake cleaner (aerosol)

Volatile and concentrated cleaning agent with intensive action. For surfaces covered with oils and greases: machine parts, braking system components (discs, pads, calipers and linings). Ideal for use in industry, crafts, repairs and assembly.

Features:

• 360° spray technology - allows you to reach every corner. • Paint-friendly - acetone-free! • Evaporates quickly. • Evaporates without leaving any residue. • Very strong - high active substance content. • High efficiency. • Effective cleaner for all parts contaminated with oil, grease, dust, etc. • Removes even old grease. • Does not contain ozone-damaging substances. • Neutral in contact with most rubbers and plastics.

TECHNICAL DATA:

Store in a cool and dry place from -5°C to +30°C.

Capacity: 500ml

Application:

• Spray the dirty parts thoroughly. • Leave to air dry or wipe dry with a cloth. • In case of heavy soiling, repeat the procedure.

Attention! Before use, check the tolerances of rubber and plastic parts in an inconspicuous place.

​​

--- ATTENTION! ---

In one car model, there may be different variants of parts.

Prepare the necessary information about your car and then compare it with the offer.:

• brand • model • capacity • power • year of production • full chassis number - VIN (17 characters)

If you are unsure about the correct selection of parts, it is recommended to verify them after purchase using the VIN number.

Applications:

NISSAN

• MICRA II (K11) 1.5 D liftback | 1,527ccm 42 KW / 57 HP | 1998.02 - 2003.02 • MICRA II (K11) 1.0 i 16V liftback | 998ccm 44 KW / 60 HP | 2000.07 - 2003.02 • MICRA II (K11) 1.4 i 16V liftback | 1,348ccm 60 KW / 82 HP | 2000.09 - 2003.02