An additional common screen and a CuSn grounding wire located under the tape protect against the influence of external electromagnetic fields. They are used for installation inside buildings in accordance with the PN-EN 50173-1, ISO/IEC 11801, ANSI/TIA 568-C.2 standards, as well as in industrial networks exposed to the influence of external electromagnetic interference.
• Cable type: Telecommunication cable
• Operating voltage: Not specified
• Voltage test: 700V AC; 1000V DC
• Insulation resistance: min 5GOm/km
• Capacitance: 50 ± 5 nF/km
• Min. bend radius of permanent connection: 6 x Fi
• Permanent installation: -30? up to 70?
• Wire loop resistance in the track (max): 190 Ohm/km
• Resistance asymmetry in the transmission track: 2 %
• Capacitance asymmetry of the transmission tracks relative to ground at 1 kHz: max 1600 pF/km
• Wave impedance of the transmission tracks: 100 ± 2 Ohm
• Indoor cable
• Min. Laying temperature: -10?
• Flame retardation on a single cable
• CPR - Certificates/DoP
• Weight of a 305m box: 11.7 kg
• Dimensions of a 305m box: 39.5x28x38.5 cm (HxWxL)
• Cores: single-wire round made of soft electrolytic copper
• Insulation: special polyolefin compound
• Core insulation colors: green, blue, brown, orange - twisted into a pair with a white core with a corresponding colored longitudinal stripe
• Center: four pairs of cores twisted into a center
• Screen: Al/Pet aluminum foil with CuSn grounding conductor
• Outer sheath: PVC polyvinyl chloride
• Sheath color: gray RAL 7035
• 1 piece is 1m of cable
• 2 pieces is 2m of cable
• 3 pieces is 3m of cable, etc.
ATTENTION! All cables and wires are shipped in one piece, if possible. However, we recommend contacting the store before purchasing to ensure the selected length is available. If you would like to receive several pieces, please let us know in the order comments!
For larger quantities, there may be an additional charge for the drum(s) on which some types of cables and wires are wound!
Товар из Польши
Возврат по недоставке
