Rigid + Flexible Brake Lines for the Rear Axle of the Opel Vectra C - Signum

Rigid + flexible brake lines for the rear axle Opel Vectra C - Signum

Set of rigid copper brake lines and flexible brake lines - Set for the rear axle for the following car brands:

Opel Vectra C

• model years 04.2002-2008

• all body versions

• models equipped with ABS

• disc brakes on the rear axle

The set includes 3 rigid copper brake hoses (from the connection on the bulkhead)

• Central left

• Central right

• Cross hose

• Two flexible brake hoses for the rear calipers

D3680 EZ4149 PHD539 330882 24436542

edit:

Improved version - as a result of customer suggestions, the catalog lengths of the central cables have been shortened by 10cm while maintaining an allowance of about 3cm to facilitate profiling.

Additionally, we add 500ml of DOT-4 brake fluid to this set

Our ZPHM series rigid copper brake hose kits are made of high-quality, seamless CuDHP R200 copper pipe, compliant with the PN-EN 12449 standard. This pipe comes from a leading European steelworks, which ensures:

• Copper brake hoses can operate at a working pressure of up to 220 bar, and an additional safety factor of x3.5 means that the burst pressure exceeds 750 bar. For comparison, in a typical braking system, the maximum pressure reaches approximately 100 bar.

• Copper with a hardness of R200/R220 is relatively malleable, making crimping and profiling possible even with simple hand tools, significantly simplifying installation.

Ready-to-install kit:

• The hoses in our kit are ready for installation – they have the appropriate types of crimping, and the ends have the correct size and thread pitch. Each hose is made to measure and marked with its location, significantly speeding up installation.

• Hose dimensions are precisely matched based on the vehicle manufacturer's technical specifications. Additionally, our technical department checks the correct selection of parts based on the VIN, ensuring maximum accuracy and minimizing the risk of discrepancies between catalog data and the actual vehicle condition.

High-quality galvanized steel terminals:

• The hose terminals in ZPHM kits are made of high-quality galvanized free-cutting steel, providing them with high corrosion resistance. Each terminal is manufactured in Poland, guaranteeing controlled quality and compliance with European standards.

• ZPHM/M and ZPHM/I versions are also available, with brass or stainless steel terminals.

• The hoses are delivered in coils, properly protected for transport. They require profiling before installation. Bending machines can be used for profiling, but a skilled mechanic can also handle the job without specialized tools.

• Rigid copper brake hoses are an excellent choice for those seeking products that combine high corrosion resistance, durability, and ease of installation. Made of high-quality materials, ZPHM kits guarantee long-term reliability, even in harsh operating conditions.

Their ease of profiling makes installation quick and hassle-free, and therefore cheaper, making them an attractive option for owners of older or more budget-friendly vehicles.

FAQ – Frequently Asked Questions

1. What are the advantages of rigid copper brake lines:

Copper lines are corrosion-resistant, making them ideal for highly corrosive environments. Additional advantages of copper wires include:

• Easy to make crimps and swells – Copper is easy to work with, so crimps and swells are easier to make, and basic, simple tools are sufficient.

• Faster installation and profiling – The ductility of copper makes the wires easy to shape, which shortens installation time and makes replacement less complicated.

• Economical choice – Copper wires are a cheaper alternative to steel wires, allowing for a low-cost restoration of full functionality to older vehicles.

2. What are the disadvantages of copper pipes?

• Copper pipe is less mechanically durable than steel pipe, but its strength parameters significantly exceed the loads typical of braking systems (the minimum burst pressure is 7x higher than that in the braking system).

• Copper can also electrochemically react with steel fittings or aluminum components, which over time can make disassembly of components difficult. For this reason, copper pipes are primarily intended for "disposable" use; there is a high probability of damage to the pipe during disassembly - and after each disassembly of a rigid pipe, it is recommended to perform new swells.

(To eliminate this problem, you can use our fittings made of brass or stainless steel).

3. What are the advantages of steel pipes over copper pipes?

Rigid steel brake pipe sets are characterized by higher mechanical durability and are used by most manufacturers for so-called First assembly. At PHU DONOCIK, we use additional protective heat-shrink sleeves to increase their anti-corrosion properties.

Steel lines are a premium product for demanding customers who want to maintain the vehicle's factory quality over long periods of use. Steel brake lines can also be made with brass or stainless steel fittings.

4. What are the disadvantages of steel lines?

• Steel lines are more demanding to process – crimping and upsetting require specialized tools and higher skill levels.

• Profiling and installation are more difficult than copper lines, so replacement is recommended for experienced mechanics. The longer installation time means higher replacement costs.

• Steel lines also have lower corrosion resistance than copper lines, requiring additional periodic inspections.

5. Summary:

Both types of lines ensure long-term and safe operation of the braking system. The choice of material depends on the user's preferences: copper lines are an economical, easy-to-install solution, ideal for older vehicles, while steel lines are an option for customers who value durability and factory quality for years to come.

OEM: 24436542 Thread A: eyelet fi12 30' Thread B: internal M10x1 Length: 330mm Which should I choose: copper ZPHM or steel ZPHS?