Flexible Teflon Braided Brake Hose Mitsubishi Lancer Viii

Flexible Teflon Braided Brake Hoses Mitsubishi Lancer VIII

Mitsubishi Lancer VIII

• model years 2007 – 2017

• CY3A CY6A

• discs on the axle rear

*After purchaseplease send us your VIN numberto select the right hose kit.

The hose is a replacement for the original - the ends may slightly differ in external shape from the original ends without significantly affecting the installation method.

Hose rear axle - beam

The cable is a replacement for the original - the ends may slightly differ in external shape from the original ends - NO MOUNTING PLATES - ADAPTATION OF SUSPENSION POINTS REQUIRED

Rear axle cables - clamp

The cable is a replacement for the original - the ends may slightly differ in external shape from the original ends without significantly affecting the method of installation.

Flexible Teflon brake hoses with steel braid of the ZPET series - DONOCIK RACING are Polish products made of the highest quality components.

• Internal hose diameter: 3.2mm

• Outer hose diameter: 8mm (* the hose with a cover in the colorless version has an increased external thickness and a different type of reinforcement braiding, thanks to which its parameters are higher than those of hoses in other color versions)

• Maximum working pressure: 275bar (at 20'C)

• Minimum burst pressure: 1100bar (at 20'C)

• Maximum recommended working temperature: 130'C

• Maximum temperature working temperature: 260'C (above 130'C the maximum working pressure is reduced by 1% for each subsequent 2'C)

• minimum bend radius: 55mm

• ends made of 230Mo7pb free-cutting steel, galvanized (ZPET INOX series - cables made with AISI 306 stainless steel ends)

• possibility to choose the color version

• Increased precision of the braking system: Thanks to the steel reinforcement, the lines do not expand under pressure like the lines on rubber hoses, which ensures precise dosing and perfect modulation of the braking force.

The shortened system response time translates into a shorter braking distance.

• Efficiency: Resistance to high pressures and very high temperatures.

• Safety: "Armored" construction and the highest quality materials ensure reliability in extreme conditions.

• Maintenance-free: The Teflon hose is impermeable to water vapor, protecting the brake fluid from waterlogging.

• Durability: Many years of trouble-free use secured by the Manufacturer's Warranty.

OEM: 4650A645 Thread A: eyelet. M10x1 Thread B: internal M10x1 SF Length: 640mm total OEM: 4650B626 Thread A: internal M10x1 SF Thread B: internal M10x1 SF Length: 255mm total OEM: 4650A083 Thread A: external M10x1 SF Thread B: internal M10x1 SF Length: 245mm total In short: After installing our hoses, the user feels improved braking efficiency, which translates into better control of the vehicle and a greater sense of safety.