Lock Gate + 3x Chip Set Chip Gate Set

Complete electronic lock for a gate/gate with chips.

90-degree angle lock allows installation on any external gate or door. Entering your property will now be a breeze without having to search for keys.

The perfect solution where conventional solutions with a mains connection are not necessarily available.

Don't worry - when the battery is running low, the device will notify you with an audible signal well in advance. If you fail to charge it within 5-7 days despite constant audio signals informing you that it needs to be charged, the lock will unlock automatically.

• complete electronic lock x1

• reading chip x3 (programmed)

• programming card (up to 13 chips)

• mounting kit

• sticker indicating where to place the chip

• user manual in Polish (pdf)

Each device is checked for lockability before shipping.

Battery charging via a micro USB cable (not included) or battery.

• Number of main cards: 3

• Number of user cards: 13

• Operating temperature: -25°C - 55°C

• Humidity: 5% ~ 97%RH

• Batteries: 2 x AA alkaline batteries (do not use carbon batteries)

• Battery life: approx. 1 year without charging!!!

• Alarm voltage: 2.4V

• Opening voltage: 2.2V

1. CARD TYPE

• 1) Main card (3 sets included), user card (13 sets to be added) The first user card is a guest card, and the remaining 12 user cards are service cards

• 2) The main card is used to add guest and service cards. The master card allows unlocking in any mode.

• 3) The service card is used to deactivate the lock using a guest card.

• 1) Press the button for approximately 3 seconds until you hear a beep. At this point, all cards will be removed and the default single card mode will be activated.

• 2) When the door lock is empty, you can set the master card. The user can set up to 3 master cards.

• 3) After reading the master card, the door lock unlocks and the beep continues. At this point, you can add a service card and a guest card. The first card added is the guest card, and the next ones are service cards.

After successfully adding the card, a "Di-" sound signal will be emitted. If the device's memory is full, a sequence of "Di-Di-Di-Di-" sound signals will be emitted. After successfully adding the cards, exit the card registration mode.

• 1) Single card mode: Read the service card (guest card). The door will be unlocked and then automatically locked after 4 seconds.

• 2) 2 cards mode: Read the service card or guest card, a continuous beep will be emitted, then read the guest card (or service card) within 4 seconds. The door will be unlocked and then automatically locked after 4 seconds.

• 3) In 2 cards mode, it is possible to read both the guest card and the service card. The maximum time for reading cards is 4 seconds.

1. Master Card Functions

• 1) Read the master card to enter the card adding mode.

• 2) Wait 5 seconds after reading the master card 4 times continuously to turn the beeper on or off. The sequence "Do-Ri-Mi-Di-Ri-Mi" means the beeper is on, and the sequence "Di-Di-Di-" means the beeper is off.

• 3) Wait 5 seconds after reading the master card 6 times continuously to turn the single card mode or 2 cards mode on or off. The sequence "Di-" means the single card mode is activated, and the sequence "Di-Di-" means the 2 cards mode is activated.

• 4) Wait 5 seconds after reading the master card 8 times continuously to delete all guest cards and service cards.

• 5) After If the master card is read 10 times continuously, all master cards are deleted.

1. Low Battery

• When the battery level is low, the device will emit a long beep. In this case, the batteries should be replaced immediately. If the batteries are not replaced, the doors will not lock or unlock.