• This kit contains additional conical flanged wheel nuts with extended threads, which should be used instead of the standard wheel nuts. When using a spacer, the original wheel nuts must not be used to secure the wheel, as the original nuts are too short and do not provide sufficient fixation.
If non-original wheel nuts are used, check that the wheel bolt holes have a diameter of at least 15 mm for M12 thread size and at least 16 mm for M14 thread size. When using accessory wheels secured with round head nuts, the use of Pro-Spacer washers is prohibited.
The use of these nuts with rims secured with spherical nuts is not permitted!
• Only for vehicles with a 31 mm stud length - Not for vehicles with a 26 mm stud length (free length measured from the wheel/hub contact surface)
• General notes regarding spacers: Eibach spacers are based on standard rims. When using replacement or limited edition rims, especially versions with studs permanently attached to the hub (wheel attachment with nuts), please check whether the rims meet the required technical requirements.
In the event of modifications to the car or additional equipment (this also applies to original products offered as an option by the car manufacturer!), such as a reinforced braking system, wheel mounting with a single central hole, sports suspension, LPG system, etc.
- it is possible that installation of our products will not be possible. We would like to inform you that the larger the rim size, the more sensitive the steering system will react after installing spacers (e.g.
through vibrations) in the event of poor wheel balance.
• The spacers should be installed by hand - avoid using electric or pneumatic tools because in some cases this may result in suboptimal spacer seating, which may cause unpleasant vibrations while driving.
• From March 2011, the use of Pro-Spacer wheel spacers in combination with steel rims is prohibited unless otherwise specified in the homologation.
• All centering and mounting elements must be removed from the hub surface (mounting screws, calipers or rings from the brake disc or drum).