Transceiver Module Ubiquiti Sfp+ 10Gb Bidi

Sfp+ 10Gb Bidi 1330/1270Nm Lc Smf 40Km Transceiver Module Compatible Sfp+ 10Gb Bidi 1330/1270Nm Lc Smf 40Km Transceiver Module Ubiquiti Compatible Ubiquiti

Transceiver module SFP+ BIDI Simplex 40km Compatible

The SFP+ BIDI (WDM) Transceiver module is designed for data transmission using ONE SINGLEMODE FIBERS and supports data rate of up to10Gb with maximum range of 40km.WavelengthTX 1330nm, RX: 1270nm,has a1xLC/UPCoptical connector. MSA compliant. Works in pair with: LO-SP-10G-2S3-40

Transceiver module SFP+ BiDi | 1330/1270nm | LC | DDM | SMF | 40km | 10GBase-BX | Compatible

For single-fiber (BiDi) connections, the transmitter wavelength on one side must match the receiver wavelength on the other side. This means that transceivers must always be installed in pairs with complementary wavelengths.

For example, an SFP+ 1270/1330nm module on one end must be paired with an SFP+ 1330/1270nm module on the other end.

LO-SP-10G-3S2-40 (1330/1270nm) must work in pairs with LO-SP-10G-2S3-40 (1270/1330nm)

LightOptics modules are a perfect match for devices such as switches, converters, routers or servers cards.

Transceivers SFP+ BIDI modules are versatile and work reliably at distances of up to 40km

Basic Parameters - Technical Specifications

LO-SP-10G-3S2-40 - SFP+ 10 Gbps 1330/1270nm LC SMF DDM 40km Transceiver is:

• Model LO-SP-10G-3S2-40

• Manufacturer LightOptics

• Transceiver Type SFP+ (Enhanced Small Form-factor Pluggable)

• Standard / Protocol 10GBASE-BX

• Transmission Speed 10 Gigabit Ethernet (10G)

• Wavelength TX: 1330nm, RX 1270nm

• Fiber Type Singlemode Fiber (SMF)

• Connector Type Simplex LC/UPC

• Distance 40 km

• Diagnostic Feature DOM/DDM (Digital Diagnostic Monitoring)

• Standards / Compliance MSA (Multi-Source Agreement)

• Operating Temperature 0 °C to +70 °C

Diagnostics of your Network

The DDM diagnostic module enables real time monitoring of the operating parameters of your transceiver, for example, the input and output optical power, temperature, voltage or current.

To get access to the DDM diagnostics, both the transceiver and the device must possess the DDM function, sometimes called DOM (nearly all managed devices are equipped with this function).

Proven quality, rigorous testing

High quality and repeatability for the safe and steady operation of your network – that's our goal.

The compatibility of the module is the effect not only of its programming, but also of thehigh standards of the production process. Our engineers adapt the transceivers to work with various networking devices, and ensure their seamless detection in switches, routers, servers or interface cards.

The reliability of the transceivers is proven with rigorous testing.

LightOptics modules are perfect for devices such as switches, converters, routers or servers from the majority of manufacturers available on the market, thanks to our adaptability to new products and changing software.