Acoustic Felt 10 - Self-Adhesive Soundproofing Mat

10mm Acoustic Felt – Self-Adhesive Soundproofing Mat

10mm Acoustic Felt is a self-adhesive, very lightweight, and flexible soundproofing material made from high-density, pressed natural nonwoven fabric. The mat effectively absorbs noise across a wide frequency range and also improves the thermal insulation of the car interior.

The material works well in dry areas inside the vehicle cabin. It can be used behind carpets, upholstery, headliners, under the dashboard, in the trunk, and on the interior wheel arches. The adhesive layer makes installation quick and easy.

Effective noise absorption in the car cabin

10mm Acoustic Felt acts as a sound absorbing layer. It helps reduce road noise, humming, resonances, and sounds reflected from bodywork and upholstery. Soundproofing with this material improves driving comfort, especially on the road and at higher speeds.

Thanks to its fibrous structure, felt absorbs sound well and can also act as a soft spacer between upholstery elements. This reduces creaking, squeaking and minor vibrations of plastic panels.

The most important advantages of 10 mm acoustic felt

• self-adhesive soundproofing mat, 10 mm thick,

• pressed natural non-woven fabric of high density,

• high noise absorption capacity,

• good thermal insulation of the vehicle interior,

• very light, soft and flexible structure,

• easy installation on flat and irregular surfaces,

• good air permeability,

• increased abrasion resistance,

• non-toxic and odorless product,

• does not cause allergic reactions,

• can be used in the automotive industry and in closed rooms,

• price is for 1 sheet 50 x 80 cm.

Use in the car

10 mm acoustic felt should be installed in dry places inside the cabin. The material can be used as a second or third layer of soundproofing on bodywork and upholstery elements. The best effect is achieved when combined with an aluminum-butyl mat and thermo-acoustic foam.

• car floor,

• central tunnel,

• engine compartment bulkhead on the cabin side,

• roof under the headliner,

• door panels,

• inner wheel arches,

• trunk sides,

• trunk lid,

• areas behind carpets and upholstery elements.

How to install acoustic felt?

Before installation, the surface should be dry, clean, and thoroughly degreased. The felt should be glued to places not exposed to direct contact with water. Thanks to its flexibility, the material adapts well to both flat and more complex surfaces.

For professional car soundproofing, it's worth using a layered system. First, you should glue in an aluminum-butyl mat, which dampens vibrations and resonances from the sheet metal. Then, you can apply thermo-acoustic foam, and 10 mm acoustic felt as a sound-absorbing layer that reduces noise inside the cabin.

The acoustic felt is made of pressed natural nonwoven fabric with a density of 1300 g/m². The material has a soft, flexible structure and is highly breathable. This effectively absorbs sound and improves acoustic comfort in the vehicle interior.

The product is non-toxic, odorless, and environmentally friendly. It can be used in cars and indoor spaces.

• Material type: self-adhesive acoustic felt

• Thickness: 10.0 mm

• Basic material: pressed natural non-woven fabric

• Density: 1300 g/m²

• Sheet dimensions: 500 x 800 mm

• Sheet area: 0.40 m²

• Sheet weight: 0.62 kg

• Surface weight: 1.55 kg/m²

• Collective packaging: 9 sheets / 3.6 m²

• Recommended installation temperature: from +15°C to +30°C

• Operating temperature range: from -40°C to +90°C

• Properties: noise absorption, thermal insulation, flexibility, soft structure

• Application: dry places inside the cabin, upholstery, floor, roof, trunk, wheel arches

• Price applies to: 1 sheet 50 x 80 cm, i.e. 0.40 m²

Why is it worth choosing 10 mm acoustic felt?

10 mm acoustic felt is a practical material for soundproofing a car interior. It absorbs noise well, improves driving comfort, and can reduce squeaking upholstery elements. It works well as a final layer in a car's soundproofing system.

It's a good choice for floors, roofs, trunks, wheel arches, door panels, and areas behind carpets. Thanks to its self-adhesive layer, the material can be quickly installed without additional glue.