Reversing Parking Sensors Silver Front Rear Led 3D Amio-03193

PARKING SENSORS WITH 3D LED DISPLAY

The Parking Assistant is a device that helps you park and reverse your car. A universal and proven device for people who value road safety. The device is simple and functional, it activates automatically.

Thanks to the ultrasonic probe, you will never hit any object with your car again. When reversing or parking, the device correctly recognizes obstacles on the road and warns the driver with a sound signal (appropriate to the distance from the obstacle).

Information is also shown on the display if the set is equipped with it.

• Power supply 12V DC

• Power consumption <4W

• Operating frequency: 40KHz

• Device operating temperature -30°C to +55°C

• Obstacle detection 2.5 - 0.3m

• Measuring error +/- 5cm

• Mounting hole 21.5mm

• Sensors' outer diameter 24.5mm

• Sensors' cable length 2.2m

• Cable length from display 5m

• Control unit

• 8 silver sensors

• mounting drill

• user manual

The set includes sensor sensors that can be placed in any configuration at the front or rear of the car, thus increasing safety in your vehicle.

The sensors are activated automatically when reverse gear is engaged in the case of rear sensors or by pressing the brake pedal in the case of front sensors. The control unit is factory calibrated.

The front sensors are activated by pressing the brake pedal (illuminating the brake lights). After pressing and releasing the brake pedal, the sensors operate for 15 seconds. The system will activate when an obstacle is detected within a distance of 80cm from the vehicle.

Obstacle detection is signaled by a distance indication, a graphical indication and, additionally, a sound via the built-in speaker.

The set is equipped with high-quality flat-flange sensors.

The sensors are completely waterproof. They are also resistant to weather conditions such as snow, rain or fog.

Universal product, fits most cars. We also have extensions for delivery vans if the included wiring is too short.

The set includes the necessary mounting elements: a drill with a hole saw, wiring such as a power cable and sensor cables, as well as a power control unit, sensors and a display or buzzer, depending on the set. Thanks to intuitive installation and mounting elements, you can easily and quickly install the parking assistance system yourself.