Gripper set H80 / 30-80mm / 20x20

Bar Feeder, Gripper for CNC Lathe / 30-80mm / 20x20

The sale is for a mechanical bar feeder, gripper for use in numerical control (CNC) lathes.

The presented gripper was developed based on our own many years of experience in machining and manufactured entirely in our company from Polish materials, which ensures failure-free operation for many years.

Initially, it was designed and manufactured for our own needs in order to automate operations and reduce the production time of parts, today our solution is used by hundreds of companies around the world.

• All elements are made in in our company using modern machines and technologies, by POLISH employees under strict quality control,

• The gripper increases the efficiency of the lathe and significantly shortens the time required to eject and set the material to the correct position!

• It is fully autonomous, does not require additional accessories such as water, coolant, air, etc.

• The adjustment screw allows for immediate configuration to the required diameter in a few seconds.

Our gripper is an ideal solution for all plants using CNC lathes that are not equipped with an automatic bar feeder, e.g. due to high purchase costs or large dimensions.

The gripper is adapted for mounting in the tool head socket.

FREQUENTLY ASKED QUESTIONS

What is the service life of the gripper claws?

From 50,000 - 500,000 pieces, depending on the type of material being processed and the surface of the bar (rolled, drawn).

It is possible to purchase additional claws at any time in case of wear or collision.

What is the repeatability of the gripper's rod extensions?

How to properly program a lathe to operate a gripper?

1. Calling the turret on which the gripper is mounted.

2. Positioning in the Z axis ..........

3. Moving onto the material in the X axis to grab the bar.

4. Releasing the jaws of the lathe chuck.

5. Time pause for opening the jaws (from 0.1s to 1s).

6. Pulling the bar in the Z axis according to the program guidelines.

7. Clamping the jaws in the lathe chuck.

8. Time pause for closing the jaws (from 0.1s to 1s).

9. Moving out of the material in the X axis.

10. Return to zero and continue production.

N01 T0404 M5 (FEEDER)

N02 G0 X80 Z-25

N03 G0 X0

N04 M84 (open jaws)

N05 G04 F0.5 (time pause for jaw opening)

N06 G0 Z0

N07 M83 (close jaws)

N08 G04 F0.5 (time pause for jaw closing)

N09 G0 X80

N10 G0 X450 Z10

How to properly set the spacing of the gripper's claws?

The spacing is adjusted using an Allen key by turning the screw left or right (photo below), after first unlocking the locking screw.

The spacing should be 0.5-1 mm smaller than the rod diameter (depending on the type and weight of the material).

The use of elastic material for the production of the claws allows for strong compression of the material.

Brand: GripTec™ Model: GC-50-3080-K2020 Mounting: 20x20 Range of pulled rods: 30-80mm Video of the work on YouTube: https://www.youtube.com/watch?v=owutJTO05xg&ab_channel=DEFCOMEU