DVS side sensors for trucks

DVS side sensors for trucks

Direct Vision Standard (DVS)

Professional side ultrasonic sensors with LED indicator

Professional blind spot side sensors are one of the required components of the DVS system.

The system consists of a control unit, an LED indicator, a buzzer, cables and 4 sensors. Ultrasonic sensors.

The device warns the driver about obstacles or objects located in the LEFT or RIGHT (depending on the mounting side) of the vehicle's blind spot.

If the system detects an object, the LED indicator starts flashing, and depending on the distance of the object, the color changes from green, through

yellow to red. The device also generates audible warnings.

The buzzer with the LED display should be placed on the pillar on the passenger side.

The first sensor should be placed near the front corner of the vehicle, the last one as close to the rear axle of the tractor as possible.

The system allows for the detection of pedestrians, cyclists and other obstacles in the lane. During installation, the range and sensitivity of the system should be determined so that the device does not respond to objects located at a greater distance, e.g. on the sidewalk.

• control unit

• 4 x specialized ultrasonic sensors

• 4 x sensor adapter

• 4 x sensor base

• LED display with buzzer

• 4 x 5m sensor cables

• 2 x 2.5m sensor extension cables

• 1 x display cable

• 1 x harness for the control unit

For this system, we also recommend using a speed and indicator sensor (available in our store), which will activate the device below a certain speed (configured during installation) and after turning on the appropriate indicator.