Induction heater for screws TELWIN Smart Inductor 5000 DELUX 230V set

TELWIN Smart Inductor 5000 DELUX 230V Induction Heater for Screws Set

☑️ Induction heating system intended for professional use in body repair shops and car workshops.

• ⭐ HEAT TWISTER - coil handle

• ⭐ SUPER REMOVER - for removing windows

• ⭐ METAL RELEASER - for heating single-sided screws

• ⭐ PAD INDUCTOR - induction glove

• ⭐ WONDER PEN II - for pulling out dents

• ⭐ Foot switch

• ⭐ Ceramic reinforcing tape 1m - 1 pc.

• ⭐ Coils - 2 pcs.

• ⭐ Mounting holder

• ⭐ Wedges - 3 pcs. - for prying the glass

See the Telwin 5000 induction heater in the video:

https://youtu.be/gHvQBgYe7Yc

Copy the link and paste it into your browser window

☑️ The portable induction heater Telwin 5000 is designed for induction heating of metal elements mainly made of steel.

☑️ Removal of:

• ⭐ trademarks

• ⭐ stickers

• ⭐ decorative strips

• ⭐ plastic elements

• ⭐ rubber elements stuck to sheet metal

☑️ Additionally:

• ⭐ unlocking rusty screws and pins

• ⭐ lifting sheet metal

• ⭐ repairing minor damage to sheet metal

• ⭐ easy and quick removal of windshield, rear window and side windows glued to the vehicle

☑️ Power parameters

• ⭐ Power supply: 230V

• ⭐ Number of phases: 1ph

• ⭐ Mains frequency:50/60Hz

☑️ Technical parameters

• ⭐ Max. power:2.3kVA

• ⭐ Induction frequency:35-100kHz

☑️ Physical parameters

• ⭐ Protection class: IP21

• ⭐ Weight:10.4kg

• ⭐ Dimensions: 390x260x230mm

• ⭐ automatically recognizes the connected tool

• ⭐ possibility to choose manual mode (MANUAL) or automatic mode (AUTO)

• ⭐ displays power bar (diode), which is transferred to the object

• ⭐ sound signal proportional to the used heater power

• ⭐ automatic recognition system for the object to be heated

• ⭐ possibility of displaying device functions on the display, such as: used tools, percentage power regulation, alarms

• ⭐ before connecting the device to the mains, check whether the data on the device meets the voltage and frequency of the mains to which we want to connect the device

• ⭐ the heater should be connected only to a power system with a neutral wire connected to ground.

• ⭐ the device has a cable with standardized plug 16A/250V

HEAT TWISTER - Coil holder with long cable

• ⭐ Installing the coil in the holder is very easy and quick. A suitably profiled button starts the heating process of the installed coil.

This particular tip can handle even strong adhesives, especially in the case of delivery vehicles. Its use allows reuse of glass, while maintaining the factory built-in seal, and effectively removes protective stickers from the bodywork.

• ⭐ The glue heats up by conduction up to the point of detachment of the sheet metal and releasing the glass.

This is an innovative solution that allows precise operation even in hard-to-reach places, for example in corners. Additionally, it allows reuse of glass while retaining the factory-built-in seal.

• ⭐ The attachmentallows reuse of glass with built-in seal. Heat distribution is uniform along the entire length of the inductor.

• ⭐ The attachment generates heat by induction and extends the effect of its distribution on the sheet metal surface, allowing better tracking of the shape of the insulation that needs to be peeled off.

• ⭐ This device is used to heat sheet metal by induction under a car glass placed on glue

PAD INDUCTOR - The induction glove allows you to remove:

• ⭐ decorative side strips

• ⭐ trademarks

• ⭐ self-adhesive strips

• ⭐ adhesives from vinyl and plastic

• ⭐ rubber elements

☑️ The generated heat is distributed "ring-shaped" under the surface of the glove, which makes the heat less concentrated compared to other tools.

• ⭐ Used for heating screws, nuts, etc. in order to unscrew them from the surface being repaired.

• ⭐ When the inductor is turned on, it generates strong magnetic fields that are invisible at the ends. The inductor must be directed only at the metal elements that are to be heated. Under no circumstances should you point the device at any part of the body!

Wonder Pen II

• ⭐ This is a tool for removing smalldents and damage caused by e.g.

The device works well in hard-to-reach places.

• 1️⃣ Before using the device

• 2️⃣ After using the device

• ⭐ 10v m8/m10

• ⭐ 14v m12/m14

• ⭐ REMOTE CONTROL FOOT PEDAL - allows you to remotely control the device.

☑️ Ceramic tape type TCZ is a specialized product woven from high-quality ceramic yarn, reinforced with inconel wire. It is characterized by excellent insulating properties and is designed to work at high temperatures, providing effective thermal protection in the most demanding conditions.

• ⭐ Thermal insulation: Ideal for all types of machines, devices, installations and structures requiring limitation of heat flow.

• ⭐ Thermal screens: Effectively protects against excessive heating of surfaces and elements located near heat sources.

• ⭐ Heating processes: Perfect as insulation in heating processes of welded structures.

• ⭐ Wire protection: Provides cover for hoses and cables operating near heat sources, protecting them from overheating.

• ⭐ Raw material: Ceramic yarn reinforced with inconel wire (CrNi with a diameter of 0.1 mm)

• ⭐ Maximum instantaneous temperature: 1200°C

• ⭐ Maximum continuous operating temperature: 1100°C

• ⭐ Loss on ignition: up to 18% – organic fibers burn out in the initial phase without affecting the key technical parameters

• ⭐ Maximum shrinkage: 3%

• ⭐ Density: 0.5 g/cm³ ± 15%

• ⭐ Color: White

☑️ The material made ofceramic tape reinforced with Inconel is also used in products such as:

• ⭐ Metal Releaser

• ⭐ SUPER REMOVER

• ⭐ GLASS GENIUS

• ⭐ To pry the glass

• ⭐ Induction heater Telwin 5000

• ⭐ HEAT TWISTER - coil handle

• ⭐ SUPER REMOVER - for removing glass

• ⭐ METAL RELEASER - for heating single-sided screws

• ⭐ PAD INDUCTOR - induction glove

• ⭐ WONDER PEN II - for dent removal

• ⭐ Foot switch

• ⭐ Ceramic reinforcing tape 1m - 1 pc.

• ⭐ Coils - 2 pcs.

• ⭐ Mounting bracket

• ⭐ Wedges - 3 pcs. - for prying the glass