Telwin Digital Puller 5500 400v spotter welder for bodywork

Telwin Digital Puller 5500 400v spotter welder for bodywork

Device for resistance welding intended for industrial and professional use

• ⭐ Telwin Digital Puller 5500 400V welder

• ⭐ automatic gun without trigger

• ⭐ Ground cable with quick connector mass

• ⭐ Slide hammer with star holder

• ⭐ Stars - 5 pcs.

• ⭐ Straight bits 1.5mm - 100 pcs.

• ⭐ Twisted bits 1.6mm - 100 pcs.

• ⭐ Cupping electrodes - 3 pcs.

• ⭐ Electrode for bits 16mm

• ⭐ Corrugated wire 2.0mm or 2.6mm - 25 pcs.

• ⭐ Electrode for wire corrugated

• ⭐ Claw 8 hook 3mm

• ⭐ Washers for welding machine - 100 pcs

• ⭐ Electrode for washers 10mm

See the Telwin 5500 400v welding machine in the video:

https://youtu.be/NJACA6-nnFw

Copy the link and paste it into your browser window

☑️ Portable resistance welding installation (spot welder) with microprocessor digital controller. The device allows for numerous types of hot and spot processing on sheets that are specific to the automotive sector and those sectors where similar types of sheet metal are used.

☑️ The main parameters of the device are as follows:

• ⭐ automatic setting of welding parameters

• ⭐ possibility of changing the welding time in relation to the value set in automatic mode

• ⭐ limiting line overcurrent after switching on the device

• ⭐ backlit liquid crystal display for displaying commands and set parameters

☑️ The spot welder can be used for welding iron sheets with a low carbon content and galvanized iron sheets.

• 1️⃣ Cable leading to the gun: 2.5m

• 2️⃣ Ground cable: 1.5m

• 3️⃣ Power supply cable: 3.5m

• 4️⃣ Holder with mass for scoring

• A. Multifunction button

- ⭐ ”START” activates the device to function when first turned on

- ⭐ “MODE” selecting the program of the tool used from H to K

- ⭐ “MEASUREMENT UNIT SELECTION” – by holding the button for 3 seconds it is possible to set the unit of sheet thickness [mm], [in], [ga]

• B. Reducing sheet thickness, welding time and power

• C. Increasing sheet thickness, welding time and power

• D. Liquid crystal display

• E. START" Signals that the "MODE" button should be pressed to activate the device for operation

• F. Displays the program used, sheet thickness or alarm code (explained in more detail in the user manual)

• G. "Studder" gun without trigger (version activated by contact with the workpiece)

• H. Spot welding of studs, rivets, washers, eye washers, triangles

• I. Welding screws/rivets with a diameter of 4-6mm

• J. Using the cupping electrode

• K. Using the driving electrode

• L. Indicates the welding time level in relation to the automatically set value

• M. Activates with the "Studder" gun

• N. Indicates that the tongs are being used

• O. Represents the thickness of the sheet metal being welded

• P. Indicates that the machine is in thermostatic protection mode

• Q. Indicates the unit of measurement [mm], [in], [ga]

• ⭐ Rated supply voltage: 400V

• ⭐ Mains frequency: 50/60Hz

• ⭐ Maximum welding current: 3800A

• ⭐ Secondary open circuit voltage: 5.6V

• ⭐ Maximum power: 10.5kW

• ⭐ Rated power: 1.8kW 50%

• ⭐ Maximum spot welding current: 2500A

• ⭐ Mains fuse: 10A

• ⭐ Power factor: 0.8

• ⭐ Duty cycle: 1.5%

• ⭐ Degree of protection: IP22

• ⭐ fasten the two wires together as closely as possible welding cables, (if any)

• ⭐ Keep your head and torso as far away as possible from the spot welding circuit.

• ⭐ Never wrap welding cables, (if any) around yourself.

• ⭐ Do not make spot connections while within the welding circuit. Make sure that both cables are on the same side.

• ⭐ Connect the return cable of the spot welding current (if any) to the workpiece on which the spot connection is being made, as close as possible to the connection.

• ⭐ Do not make spot connections near the spot welder, do not sit or lean on it during operation (minimum distance: 50cm).

• ⭐ Do not leave ferromagnetic objects (creating a magnetic field around them) near the spot welding circuit.

Pistol with brass electrode holder

• 1️⃣ Electrode holder for Ø10/16mm electrodes

• 2️⃣ Automatic pistol

• 3️⃣ Pistol grip

• 4️⃣ Suspension loop

☑️ Used for Dent removal for both small and larger bodywork dents.

• ⭐ Tip: Triangle / Star Spotter Holder

Claw thickness is 3mm

☑️ Internal thread dimensions:

• ⭐ First thread M14

• ⭐ Second thread M10 deeper in the claw holder.

This is a universal claw for any spotter welder.

Electrode for Spotter bits (OT washers).

☑️ The electrode has a rubber band holding the bit for comfortable work.

• ⭐ Holder: 16mm

☑️ Bits with copper coating have better thermal and electrical conductivity, thanks to which the welding machine needs less power to heat the bit, which results in - no sparking when burning the sheet metal around the weld and the sheet metal does not overheat in the place of the through-weld.

Thanks to this, we avoid future corrosion of the sheet metal from the other inner side:

• ⭐ 100pcs.

• ⭐ Thickness: 1.5mm

• ⭐ Length: 55mm

• ⭐ Eye width: 22mm(external), 10mm(internal)

• ⭐ Handle width: 9mm

• ⭐ 100pcs.

• ⭐ Thickness: 1.6mm

• ⭐ Length: 55mm

• ⭐ Eye width: 22mm(external), 10mm(internal)

• ⭐ Handle width: 9mm

☑️ – Wire with copper coating has better thermal and electrical conductivity, so the welder needs less power to heat the wire!

• ⭐ Length: 320mm

• ⭐ Thickness: 2.0mm or 2.6mm

• ⭐ Height: 10mm

• ⭐ Quantity in the package: 25 pieces

Electrode for corrugated wire

☑️ Electrode for precise welding of corrugated wire to the sheet metal surface using a spotter or welding machine.

☑️ Technical data:

• ⭐ Electrode diameter: 10mm

• ⭐ Length: 80mm

• 1️⃣ Special groove for comfortable work

• 2️⃣ Made of a special copper alloy

Pads for spotter welding machine 100 pcs.

☑️ Thanks to the copper coating used in the pads we use their maximum efficiency ensuring good gluing, moreover, we do not overheat the sheet metal from the inner side and around the weld.

• ⭐ Diameter: 16mm (external) 8mm (internal)

• ⭐ Thickness: 1.6mm

☑️ Electrode for welding spotter pads with a magnet for convenient work.

• ⭐ Handle diameter: 10mm

• ⭐ Electrode length: 65mm

Electrode for cupping and shrinking sheet metal.

➡️ Mount it to the handle of the spotter welder (where the hammer goes), heat the tip, then draw a "snail" across the sheet metal surface to remove and harden it.

➡️ The electrode is also used for shrinking sheet metal. It is used for spot heating of deformed areas. Thanks to its precise operation, the electrode helps to eliminate stresses and restore the sheet metal surface to its original shape.

It is ideal for repairing dents and deformations in processes requiring accuracy and high temperature resistance.

• ⭐ Length:305mm

• ⭐ Diameter:10mm

• ⭐ Telwin Digital Puller 5500 400V

• ⭐ Automatic gun without trigger

• ⭐ Ground cable with glass mass

• ⭐ Slide hammer with star holder

• ⭐ Stars - 5 pcs.

• ⭐ Straight bits 1.5mm - 100 pcs.

• ⭐ Twisted bits 1.6mm - 100 pcs.

• ⭐ Cupping electrodes - 3 pcs.

• ⭐ Electrode for bits 16mm

• ⭐ Corrugated wire 2.0mm or 2.6mm - 25 pcs.

• ⭐ Electrode for wire wavy

• ⭐ Claw 8 hook 3mm

• ⭐ Pads for welding machine - 100 pcs.

• ⭐ Electrode for 10mm pads