Telwin Digital Puller 5500 230v spotter welder for bodywork

Telwin Digital Puller 5500 230v spotter welding machine for bodywork

Resistance welding device intended for industrial and professional use

See the Telwin 5500 230v welding machine on video:

https://youtu.be/l3x_PkgvHe8

Copy the link and paste into your browser window

☑️ Portable resistance welding installation (spot welder) with microprocessor digital controller. The device allows for numerous types of hot and spot welding on sheets that are specific to the automotive sector and those sectors where similar types of sheet metal are used.

☑️ The main parameters of the device are as follows:

• ⭐ Automatic setting of welding parameters

• ⭐ Possibility to change the welding time in relation to the value set in automatic mode

• ⭐ Limitation of line overcurrent after switching on the device

• ⭐ Backlit liquid crystal display for displaying commands and set parameters

☑️ The spot welder can be used for welding iron sheets with a low carbon content and galvanized iron sheets.

• 1️⃣ Ground cable: 1.5m

• 2️⃣ Cable leading to the gun: 2.5m

• 3️⃣ Power cable with plug: 3.5m

• 4️⃣ Handle with quick ground for comfortable work

• A. Multifunction button

- ⭐ ”START” activates the device to function when first turned on

- ⭐ “MODE” selecting the program of the tool used from H to K

- ⭐ “MEASUREMENT UNIT SELECTION” – by holding the button for 3 seconds it is possible to set the unit of sheet thickness [mm], [in], [ga]

• B. Reducing sheet thickness, welding time and power

• C. Increasing sheet thickness, welding time and power

• D. Liquid crystal display

• E. START" Signals that the "MODE" button should be pressed to activate the device for operation

• F. Displays the program used, sheet thickness or alarm code (explained in more detail in the user manual)

• G. "Studder" gun without trigger (version activated by contact with the workpiece)

• H. Spot welding of studs, rivets, washers, eye washers, triangles

• I. Welding screws/rivets with a diameter of 4-6mm

• J. Using the cupping electrode

• K. Using the driving electrode

• L. Indicates the welding time level in relation to the automatically set value

• M. Activates with the "Studder" gun

• N. Indicates that the tongs are being used

• O. Represents the thickness of the sheet metal being welded

• P. Indicates that the machine is in thermostatic protection mode

• Q. Indicates the unit of measurement [mm], [in], [ga]

• ⭐ Rated supply voltage: 230V

• ⭐ Mains frequency: 50/60Hz

• ⭐ Maximum welding current: 3800A

• ⭐ Secondary open circuit voltage: 5.6V

• ⭐ Maximum power: 10.5kW

• ⭐ Rated power: 1.8kW 50%

• ⭐ Maximum spot welding current: 2500A

• ⭐ Mains fuse: 16A

• ⭐ Power factor: 0.8

• ⭐ Duty cycle: 1.5%

• ⭐ Degree of protection: IP22

• ⭐ fasten the two cables as closely together as possible welding cables, (if any)

• ⭐ Keep your head and torso as far away as possible from the spot welding circuit.

• ⭐ Never wrap welding cables, (if any) around yourself.

• ⭐ Do not make spot connections while within the welding circuit. Make sure that both cables are on the same side.

• ⭐ Connect the return cable of the spot welding current (if any) to the workpiece on which the spot connection is being made, as close as possible to the connection.

• ⭐ Do not make spot connections near the spot welder, do not sit or lean on it during operation (minimum distance: 50cm).

• ⭐ Do not leave ferromagnetic objects (creating a magnetic field around them) near the spot welding circuit.

Pistol with brass electrode holder

• 1️⃣ Electrode holder for Ø10/16mm electrodes

• 2️⃣ Automatic pistol

• 3️⃣ Pistol grip

• 4️⃣ Suspension loop

☑️ Used for Dent removal for both small and larger bodywork dents.

• ⭐ Tip: Triangle / Star Spotter Holder

Triangles equipped with a copper-plated coating feature a special chemical composition that allows for easy welding to the bodywork. This results in no burning of the sheet metal on the inner side and around the weld.

• ⭐ Welder Telwin Digital Puller 5500 230V

• ⭐ Gun without trigger

• ⭐ Ground cable with mass for spot-tapping

• ⭐ Impact puller with star holder

• ⭐ Stars - 5 pcs.