CARBURETOR FOR HONDA GX160 ENGINES
▶️ CARBURETOR FOR HONDA GX160 ENGINES (163–193 cm³) – REPLACEMENT + INSTALLATION KIT
Is your GX160 engine hard to start, fluctuating at idle, or losing power under load? A worn or dirty carburetor is most often the culprit – this high-quality replacement restores the correct fuel-air mixture and stable operation in your work equipment.
Fits many popular 168F / 160F / G200F engines used in compactors, aggregates, pumps and tillers.
•For HONDA GX160 and compatible 168F / 160F / G200F
•Capacity range:163–193 cm³|Power:5.0–6.5 HP
•High-quality replacement– solid workmanship and reliable Adjustment
•Stable idle– less stalling and surging
•Better operation under load– even RPM in difficult conditions
•Complete assembly kit– quick replacement without searching for parts
•Carburetor with tap– convenient fuel supply control
HIGHEST QUALITY TURKISH REPLACEMENT!
▶️ Stable RPM = quiet operation machines
A dirty or leaking carburetor often causes surging and stalling at idle, especially after a long period of inactivity. Replacing with a new carburetor allows you to maintain even speed and more predictable operation of the device in every range.
• Even operation at idle and under load
• Less jerking and interruption during operation
▶️ More reliable starting and correct mixture
When the carburetor is worn, the mixture can be too lean or too rich, making it difficult to start the engine. This model helps restore the correct fuel dosage, making the engine start easier and more stable.
• Easier starting when cold and warm
• More stable throttle response after starting
▶️ What equipment is it most often chosen for?
This is a popular type of carburetor used in GX-class engines, so it is perfect for work equipment where reliability and stable RPM are important. You will most often find it in devices used seasonally, where fuel can "stagnate" in the system.
•Compactors,generator generators,pumps,cutters,shredders, tillers and the like
▶️ Compatibility - not just Honda
The carburetor fitsHonda GX160, as well as many equivalent/clone engines with similar parameters. If your equipment has a 160F / 168F / G200F unit in the range of 163–193 cm³ (5.0–6.5 HP) – this will often be the correct type (it is always worth comparing dimensions before purchasing).
• Honda GX160
• Selected engines: Loncin / Lifan / Kipor / Zongshen / Holida / Zipper / Kama / Venatec / Kraftwele etc.
• Designations: 160F, 168F, G200F(163–193 cm³, 5.0–6.5 HP)
▶️ Better operation under load in work equipment
In compactors, aggregates or pumps, it is important that the engine does not lose power during operation. The new carburetor improves mixture delivery, so the engine slugs less and performs better under heavy use.
• Better performance under heavy work
• Less risk of stalling under load
▶️ Kit includes:
• Carburetor with tap
• Hose + clamps
• Throttle lever
▶️ TECHNICAL DATA:
• Distance between mounting holes: 42.5 mm
• Outlet hole diameter: 19 mm
• Inlet hole diameter: 24 mm
• OEM numbers (replacement): 16100ZH8W51 / 16100-ZH8-W51
• Fits, among others, for: Honda GX160 and selected engines 160F / 168F / G200F (163–193 cm³, 5.0–6.5 HP)
Товар из Польши
Возврат по недоставке
