Rail connector 0.2 - 4 mm2 PC4 orange screw terminal
➡️ An electrical installation consisting of many wires must ensure the continuity of current flow in the circuit. The feed-through terminal blocks are mounted on a TH/TS 35 DIN rail and enable connecting and bridging wires.
➡️ PC series rail terminal blocks enable connecting wires with a cross-section of 0.2 - 4mm2 (24 - 10 AWG) using screw terminals. The terminal housings are made of high-quality PA66 and UL94V-0 plastics.
➡️ All metal parts in the terminal block are made of coated copper alloy. DEGSON rail terminal blocks have undergone numerous tests confirming their quality and durability. The terminal blocks have been awarded UL and VDE certificates.
➡️ Features of the PC4 rail terminal block:
✔️ screw terminals
✔️ rated voltage 800 V
✔️ rated current 32 A
✔️ wire cross-section0.2 - 4 mm2 (24 - 10 AWG)
✔️ certification VDE (no. 40022972) and UL (no. E228872)
✔️ color orange
✔️ high-quality material
symbol | PC4-01P-15-00A(H)
type | rail connector
type | screw
color | orange
application | cable connection
nominal voltage | 800 V
nominal current | 32 A
for cable cross-section | 0.2 - 4 mm2
certificates | UL, VDE, CE
testing standard | EN60947-7-1: UL1059
bleed | 6.2 mm
number of poles | 1P
test data EN60947-7-1 | VDE certificate NO. 40022972
UL1059 test data | UL E228872
overvoltage category | III
degree of contamination | 3
material group | I
Impulse voltage | 8 kV
Bolt tightening torque | 0.5 Nm
application in groups | B, C, D
nominal voltage for groups (B, C, D) | 600, 600, 600 V
Nominal current for groups (B, C, D) | 30, 30, 5 A
Nominal connection capacity | 24 - 10 AWG
Permissible permanent pressure | -
Screw type | M3
flammability class UL94 | V-0
allowed ambient temperature | -40~ +105
relative humidity | 5% - 95%
inspection standard | MIL-STD-105E II
AQL | 0.65
case material | PA66, UL94V-0
Screw material | Tin-plated copper
Connector material | Nickel-plated copper
recommended stripping of insulation for the wire | 7 - 8 mm
fastening for the wire | stripping the wire to the desired length, then tightening with the nominal torque.
Wire attachment | Strip the wire to the desired length, then put on the insulating tip and tighten with the nominal torque.
Accessories available |
(in our offer)
manufacturer | DEGSON