Thermostat for Terrarium Aquarium with Programmer Temperature Controller

- microprocessor (accurate)

- easy programming

- programmable to 0.1°C

A thermostat is an essential element of every terrarium or sometimes aquarium. Once programmed, it constantly monitors the minimum and maximum temperature in your tank. Accuracy to 0.1°C, separate inputs for heating and cooling, separate settings for day and night, plus the ability to program hysteresis and an alarm - all this means you won't have to worry about the temperature in your terrarium or aquarium anymore.

Multi-Programmer:

It has extensive functionality, unique among other programmers. It features two general programming options.

Option 1: Set 4 intervals of continuous operation. e.g.: (1) ON at 8:00 OFF 10:00 / (2) ON 11:15 OFF 12:35 / (3) ON 15:45 OFF 17:00 / (4) ON 18:32 OFF 21:12

Option 2: Automatic intervals. Set a break in operation every 30 minutes, every hour, 1.5 hours, 2 hours, etc. and the device's operation length to 10 seconds, 20 seconds, 30 seconds, etc.

For example, you can set a given device to turn on every half hour for 20 seconds, or every 2 hours for 20 minutes, etc.

It is done using three touch buttons. Switch between functions and arrows to set humidity, time, start of day/night, etc. Complete programming will take you about 2 minutes.

What can I connect?

- heating cable

- heating mat

- heating bulb, heat emitter

- aquarium heater

- and others

- cable length with probe: 200cm

- power cable length: 150cm (EU plug with grounding)

- cable length to sockets: 200cm (EU sockets with grounding, without pin)

- temperature reading and programming accuracy: 0.1°C

- accuracy (maximum error in thermostat operation) of 1°C

- operating range: from -30°C to 90°C

- temperature measurement frequency: 5 sec.

- maximum load 1200W (2x600W)

- dimensions of the part with the display: 107x88x38mm

- dimensions of the part with sockets: 110x63x44mm

- probe dimensions: 8x8x40mm