HBL canister filters were created with the best possible filtration in mind, thanks to their large volume. At the same time, the filter's design allows it to be placed outside the tank, on the edge of the glass, thus saving space in the aquarium, in a cabinet, or under the aquarium.
These filter features significantly outperform internal, cascade, and standard external filters. They provide better filtration than internal and cascade filters, are easier to use, and do not take up as much space as standard external filters.
6 baskets and filtration in the HBL filter:
The filter has six baskets for loose or sponge filter media. Each basket is separated by a special microfiber fabric that supports biological and mechanical filtration. Baskets make filter maintenance, cartridge replacement, and regeneration much easier.
Media baskets provide adequate space for any filter media, such as activated carbon, NEO MEDIA, or Organ-Ex polymers. Chemical and polymer media should be selected according to the aquarium's needs.
Water enters the filter via an adjustable-length tube, using three segments. This way, the filter sucks in impurities lying on the bottom, which are a common cause of silting and deterioration of water quality. For tube lengths, see the technical data at the end of the description.
The water outlet has a telescopic structure to easily adjust the outlet height to the aquarium's flood level. The outlet has two interchangeable tips. The flattened outlet tip (similar to a loc-line) perfectly induces appropriate water movement and has a ball joint that allows you to direct the stream in any direction.
The rain shower outlet is useful for aerating the water and creating moderate water movement, which is unnecessary in small aquariums. Flow regulation: The filter has a smooth, stepless, double flow regulation, and therefore efficiency.
This regulation allows the filter to be adapted to aquariums from 30 to 115 liters. Valves are located on the filter inlet and outlet. Both the outlet and inlet tubes can be directed in any direction on a horizontal plane within a 360-degree angle.
This allows the outlet and inlet to be placed anywhere in the aquarium.
The filter is placed on the edge of the tank using special hangers. These holders are adjustable to fit glass thicknesses ranging from 4mm to 20mm. A special foot holds the filter vertically. Made of flexible and soft rubber, it perfectly dampens vibrations caused by the rotor and water flow, making the filter inaudible.
The SunSun filter is built on the basis of many years of experience. It is characterized by reliability and efficient operation. The impeller, which is the heart of the device, is resistant to the high resistance of the pumped water and has an axle made of sintered stainless steel and titanium, enabling the pump to operate in seawater.
I'm super flat:
If you want to place the filter behind the aquarium, you only need 11cm!
- power consumption 6W pump
- maximum flow 500l/h
- minimum flow 150/h
- dedicated for aquariums from 50l to 120l
- dimensions of the bucket: 99 x 190 x 295 mm (length x width x height)
- length and height of the bucket with tubes: length 170mm and height 320mm
- length of the inlet tube: 13cm, 22cm and 31cm
- rain shower length: 16cm
Original product. Manufactured by SUNSUN. Supplied with the manufacturer's packaging.
Trade name: Sunsun Slim Hang Canister L
Manufacturer code: HBL-803
Size: L
Товар из Польши
Возврат по недоставке
