TAGATORON MS Chassis Carbon Fiber Set Cover (5 types) [Bridge/Gear Retainer/Gear Reinforcement/Motor Holder/Battery Retainer]

TAGATORON MS Chassis Carbon Fiber Set Cover (5 types): [Bridge/Gear Retainer/Gear Reinforcement/Motor Holder/Battery Retainer]

Key Specifications: - Package Size: 8.5 x 15.1 x 1.8 cm - Package Weight: 20 g

Product Details: ✅【Bridge】Effective in strengthening chassis rigidity. Installation requires modification of the chassis bottom. If you are considering battery drop modification, please purchase the separately sold jig "MS Holder TrimAssist". For chassis with battery drop modification, adjust the bridge height with washers, etc., according to tire diameter and your preferred battery height. ✅【Gear Retainer】Retains play in the counter gear during driving, stabilizing torque. ✅【Carbon Fiber for Gear Cover Reinforcement】Increases rigidity against chassis twisting. Requires modification of the original gear cover for installation. ✅【Motor Hold】Prevents the motor's A-part from loosening due to impacts during driving, suppressing torque loss. ✅【Battery holder】Lighter than the original part. ⚠️ Electricity will flow if the "bridging carbon" comes into contact with the battery terminals. Protect the contact area with an insulating material such as masking tape. ✅This product is not manufactured by Tamiya Corporation. It is a compatible product designed for casual prototyping and test runs. It cannot be in official Mini 4WD competitions or races based on sanctioned competition rules. ✅For other competitions and races, please check the respective regulations and rules. Product Introduction ●【Bridge】Effective in strengthening chassis rigidity. Installation requires modification of the chassis bottom. If you are considering battery drop modification, please purchase the separately sold jig "MS Holder TrimAssist". For chassis with battery drop modification, adjust the bridge height with washers, etc., according to tire diameter and your preferred battery height. ●【Gear Retainer】Retains play in the counter gear during driving, stabilizing torque. ●【Carbon Fiber for Gear Cover Reinforcement】Increases rigidity against chassis twisting. Requires modification of the original gear cover for installation. ●【Motor Hold】Prevents the motor's A-part from loosening due to shocks during operation, suppressing torque loss. ● [Battery holder] Lighter than the genuine part. *Electrification occurs when the "bridging carbon" and the battery terminals come into contact. Please protect the contact area with an insulating material such as masking tape. ●This product is not manufactured by Tamiya Corporation. It is a compatible product designed for casual prototyping and test runs. It cannot be in official Mini 4WD competitions or races based on sanctioned competition rules. ●For other competitions and races, please check the respective regulations and rules.