Flat set screw with slot M4x16 DIN551

Set screw M4x16 DIN551

✔️ Type: set screw (set screw)

✔️ Standard: DIN 551 – grub screw with flat point, straight slot (equivalent to ISO 4766 / PN 82272)

✔️ Thread: metric M4, full thread along the entire length of the shank

✔️ Length: 16 mm

✔️ Shape: headless, notch for flat screwdriver

✔️ End: flat point – for pressing against a flat surface surface

✔️ Material: steel

✅ Clamping and locking elements on shafts – gears, bushings, rings, clutches, levers, etc.

✅ Securing pulleys, hubs and bearings against displacement on the shaft

✅ Adjustment connections – easy tightening or loosening when adjusting the mechanism

✅ Applications in agricultural and industrial machines, gears and drives as practical workshop standard

➡ M4X16 DIN551

✅ M4x16 DIN 551 set screw – a standard part for locking elements on the shaft, useful in every workshop and machine service

✅ No head – after screwing in, the screw does not protrude above the surface of the element (e.g. hub, sleeve), so it does not interfere with other parts and allows for a compact system installation

✅ The slot for a flat screwdriver enables quick assembly and adjustment using a standard screwdriver – no special keys required

✅ The flat point ensures even pressure on the flat surface of the shaft or element – ​​minimizes the risk of cutting into the material and damaging the shaft compared to a tapered point

✅ Full thread along the entire length allows for free adjustment of the screw-in depth and reliable pressure in various thicknesses of walls, sleeves or hubs

✅ It works well as an adjustment element – ​​suitable for both permanent locking connections and points where periodic adjustment or service is required during operation. See also other DIN551 set screws available in our offer.