Automatic charger for charging car, motorcycle and other 12V/24V 8A/4A batteries.
Microprocessor-controlled, it has 4 automatic charging modes switched by a single "MODE" button: "CAR/TRUCK" vehicle mode, "AGM/GEL/SLA" start/stop battery charging mode, "MOTORCYCLE" motorcycle mode and "PULSE REPAIR" battery regeneration mode.
· It can be used to charge the following batteries: lead-acid, calcium, gel, water, STRAT/STOP AGM and EFB batteries (cannot be used for lithium batteries).
· The built-in microcomputer automatically recognizes winter and summer time.
· Automatic charging protects the battery from overcharging.
· The charger can be left connected to the battery indefinitely.
· It can also help regenerate exhausted and sulphated batteries.
· The LCD display shows the charge level, charging voltage, operating modes, temperature, incorrect connection and other necessary information.
· Equipped with protection against overheating, overcharging, short circuit and reverse polarity.
· Maximizes the battery charging process thanks to the "WINTER/SUMER" function, where the microcomputer automatically detects the ambient temperature and automatically adjusts the optimal charging voltage.
- CAR/TRUCK – used for passenger cars, buses, trucks, agricultural vehicles and 12V lead-acid batteries (range: 15Ah-100Ah)
- AGM/GEL/SLA – used for 12V car batteries with START/STOP function (range: 10AH-100Ah)
- MOTORCYCLE – Designed for all types of motorcycles and 12V lead-acid batteries (range: 2Ah-20Ah) In motorcycle mode, the charger switches to trickle charging to keep the battery charged. When the voltage drops below 12.5V, the charger will turn on automatically and fully charge the battery.
- PULSE REPAIR – allows for regenerative pulse charging of an old battery that has not been used for a long time and is unable to be charged in normal mode.
1 Battery desulphation
2 Soft start charging
3 Bulk charging
4 Absorption charging
5 Battery test
6 Regenerative charging
7 Float and maintenance charging
Not all batteries can be repaired and recovered.
· Battery types: lead-acid, calcium, gel, water, STRAT/STOP AGM and EFB batteries
· Voltage detection: yes
· mode switching: yes
· polarity and short circuit protection: yes
· non-battery connection protection: yes
· overvoltage and overheating protection: yes
· voltage: 12V
· output current: DC max. 6A
· input voltage: AC 110-220V (50-60Hz)
· output voltage: DC 13.8-15.5V
· minimum voltage: 0.3V
· battery range: 4-100Ah
· thermal protection: 65 degrees C +/- 5 degrees C
· efficiency: 85%
· cooling: fan
· dimensions: 150x82x62 mm
· weight: 400g