Car Battery Charger 24V 12V 30A

Pulsed Car Battery Charger 12V 24V 20A

This is an intelligent charger for the most popular 12V and 24V batteries used in automotive and industrial applications.

In addition, it has a quick charging function.

• For the most popular 12V and 24V batteries (Wet battery / Dry battery / Lead-acid battery / Maintenance-free battery / Gel battery) / lithium-ion)

• Charging and repair mode

• Possibility of manual adjustment of the charging current

• For charging car and motorcycle batteries

• Handy and easy to store

• Fast charging function

• Feel safe during every journey

• Automatic selection - 12V and 24V

• Consumes little electricity

• Handle with finger recesses

Compact Car Charger - for Most Batteries Available on Market

It is used to charge car, motorcycle, and lead-acid batteries from 10-400Ah. It automatically detects the charging current at 12V or 24V, depending on the battery you are charging. The charger has a compact size, making it handy and easy to store!

• color: black and gray

• material: metal

• charging time:4-6 h

• intended for: batteries: 12 and 24V

• maximum current: 20A

• dimensions (width / height): 26.5/19cm

• weight: 2.05kg

• weight in packaging:2.50kg

AUTOMATIC 12V/24V DETECTION

The device automatically detects the battery voltage, so before charging it sets the correct value to 12V or 24V depending on your needs. It will easily charge popular car, motorcycle and many other batteries. It is extremely efficient, effective and uses little electricity.

HOW TO CHARGE THE BATTERY?

1. Connect the RED charging clamp to the + POSITIVE terminal on the battery.

2. Connect the BLACK charging clamp to the NEGATIVE terminal on the battery (we recommend that when charging the battery in a vehicle, you connect the BLACK charging clamp to the engine block).

3. Set the correct battery type and operating mode.

4. Connect the charger to the power supply.

7 STAGE CHARGING

STAGE 1: Desulfation: recognition of a sulphated battery, charging with a pulsed current of low voltage and high current allows the removal of sulphate from the battery plates, thus restoring its initial capacity.

STAGE 2: Soft start: if the battery is not damaged, charging begins with a relatively low current (approx. 15%), gradually increasing its value.

STAGE 3: Bulk chargingcharging with a constant current, the voltage is increased to the maximum.

STAGE 4: Absorption Charging - The battery is charged at the configured absorption voltage, with the charging current slowly decreasing as the battery approaches full charge.

STAGE 5: Battery Test: a battery charge test lasting approximately 2 minutes - if the battery charge level does not decrease after charging is stopped, the charging process is terminated.

STAGE 6: Regenerative Charging - used in the final charging phase.

STAGE 7: Float and Maintenance Charging - when the battery is fully charged and equalized, it returns to the starting voltage, which is the current balance point for the battery being charged.

REPAIR AND CHARGING FUNCTION

In addition to the standard charging mode, the device has a repair mode.

Repair mode is an advanced mode for recovering batteries that are old, unused, damaged, stratified, or sulfated.

DISPLAYING CHARGING PARAMETERS

Enables additional control of your battery's status. The large display informs about the current current, charging mode, and current battery voltage. You can also see the charge status as a percentage.

Very high charging efficiency at above-zero temperatures. Thanks to advanced charging process control, the charger's efficiency is 98%, which makes it incomparable to traditional chargers without this type of technology.

Supports most batteries available on the market: Wet battery / Dry battery / Lead-acid battery / Maintenance-free battery / Gel / Lithium-ion battery Note: Not every battery can be repaired.