Extender Converter HDMI to LAN RJ45 over twisted pair 30M

Advanced Extender HDMI to RJ45 LAN Extender 30m

⭐ HDMI to RJ45 Extender enables HDMI signal transmission up to 30 meters using a standard Cat 5e/6 network cable. Thanks to this solution, you can easily and effectively transmit video and audio signals from one device to another over a greater distance, without losing quality.

⭐ The devices do not require additional power supply - they are powered by PoE.

➡️ Extender HDMI extender 30m over twisted-pair cable

✅ The HDMI extender enables the transmission of HDMI signals in 3D resolution using one pair of UTP category 5 or 6 cables, enabling transmission distances of up to 30 meters.

✅ Using the cable UTP is more cost-effective (it is significantly cheaper than HDMI) and enables easier installation thanks to greater resistance to mechanical damage at bends.

✅ The set consists of a transmitter (Sender) and a receiver (Receiver), both connected via HDMI cables, which allows users to save both time and installation costs.

➡️ Technical Specifications:

• ⭐ Inputs: HDMI (TX) and RJ45 (RX)

• ⭐ Outputs: RJ45 (TX) and HDMI (RX)

• ⭐ Power supply: via HDMI and PoE

• ⭐ Maximum UTP cable length: 30 meters (category 6)

• ⭐ Supported resolutions: 3840P (4K), 1920P (FULL HD), 720P (HD) and lower

• ⭐ Maximum HDMI cable length: 10 meters

• ⭐ Compatibility: HDMI 2.0 and HDCP 2.2

• ⭐ Installation: Plug and Play, no drivers required

• ⭐ Dimensions: 6 x 2.5 x 2 cm

• ⭐ Housing material: plastic

➡️ Connection Instructions:

• ⭐ Transmitter (TX): Connect directly to the device from which you want to send the signal, e.g. a computer, set-top box, or console. It is recommended that the HDMI cable be a maximum of 10 meters long.

• ⭐ UTP cable: Connect the transmitter (TX) to the receiver (RX) using a UTP cable (category 5 or 6). The maximum cable length is 30 meters; for lengths over 20 meters, Category 6 cable is recommended.

• ⭐ Receiver (RX): Connect directly to a display device, e.g., projector, TV, monitor.