Exta Life - 1-channel radio receiver ROP-21

The ROP-21 radio receiver is the final element of the EXTA LIFE system, allowing you to control any device in your home or office. A single normally open contact output allows you to control low-voltage circuits (e.g., 12/24 V AC/DC) and high-voltage circuits (230 V AC).

The ROP-21 is also useful for remotely triggering other devices and providing control signals. The receiver can also be successfully used to control solenoid valves in heating systems. The current status of a device controlled by the ROP-21 is displayed in the mobile app thanks to bidirectional communication between the receiver and the controller.

This communication method also allows for receiver parameterization and remote assignment of transmitters (without physical access to the receiver). A frame coding algorithm ensures control security. In addition to the controller, the ROP-21 can be controlled simultaneously from EXTA LIFE system transmitters.

The receiver can accommodate multiple transmitters, allowing for independent control from multiple locations. The device is designed for installation in flush-mounted and surface-mounted junction boxes.

Additional, configurable wired inputs expand control functionality. The receiver has an implemented remote software update function from the controller.

• Rated supply voltage: 230 V AC

• Rated frequency: 50 / 60 Hz

• Rated power consumption:

1. 0.45 W – standby (Standby)

2. 0.80 W – output on

• Number of channels: 1

• Transmission: radio, bidirectional – ISM 868 MHz band (868.50 MHz)

• Transmission method: algorithm based on a 128-bit key

• Operating range: up to 330 m in open area

• Optical signaling (transmission / programming): RGB LED

• Maximum number of paired buttons: 96 pairs

• Information about the current status of the receiver: yes, in the EXTA LIFE mobile application

• Operating modes in cooperation with EXTA LIFE system transmitters: on, off, bistable, monostable, time

• Operating modes in cooperation with the EFC-01 controller: on, off, time

• Number of external inputs: 2

• Compatibility with connectors*: monostable (buttons), bistable

• Operating modes for external inputs**: only on, only off, bistable, monostable, time, on/off

• Time setting range***: 1 s – 18 h

• Relay contact parameters: 1 x NO 5A / 250 VAC (voltage-free normally open contact)

• Maximum output load capacity:

1. Incandescent and halogen bulbs – 750 W

2. LED bulbs – 60 W

3. CFL fluorescent lamps – 250 W

• Operating temperature range: -10 ÷ +55 °C

• Housing protection class: IP20

• Protection class: II

• Dimensions: 47.5 x 47.5 x 20 mm

• Weight: 0.043 kg

• PN-EN 60669, PN-EN 60950, PN-EN 61000

• PN-ETSI EN 300 220-1, PN-ETSI EN 300 220-2

* switch type configured via the EXTA LIFE mobile application. By default, the inputs are designed to work with monostable switches (buttons) in bistable mode.

**operating mode depends on the selected switch type

*** time is set independently for each transmitter entered into the receiver in time mode, for each external input, and for control via the mobile application.