TechniSat CO Sensor 1 Alarm 85dB Carbon Monoxide Detector

?️ Protection against the "silent killer" - Keep your family safe with the TechniSat CO Sensor 1 carbon monoxide detector

Carbon monoxide (CO) is completely invisible, tasteless, and odorless. It doesn't warn, lulls you into a state of alertness, and causes numerous home tragedies every year. TechniSat CO Sensor 1 (catalog number: 76-5334-00) is an advanced carbon monoxide detector that constantly monitors the air quality in your home, ensuring you have a good night's sleep every night.

Designed with the highest protection standards in mind, the TechniSat sensor is an absolutely essential piece of equipment for every house or apartment with a gas furnace, coal boiler, fireplace or instantaneous water heater (so-called bath heater).

Thanks to the use of an extremely sensitive sensor, the device reacts at an early stage of a deadly gas leak, before its concentration begins to pose a threat to household members.

? Why is TechniSat CO Sensor 1 a safe choice?

• ? A silent guardian 24/7: The device continuously "examines" air samples, requiring no intervention from you.

• ? Complete Mobility: Battery power means the sensor is not dependent on power outages (which often accompany furnace breakdowns) and can be mounted anywhere.

• ⚙️ Self-Test Function: The device constantly monitors its technical condition. You'll be immediately informed about the need to replace the battery or a failure thanks to appropriate messages.

? Precise technology and an alarm that will wake everyone up

When it comes to life-saving devices, there's no room for compromise or half-measures. The TechniSat CO Sensor 1 puts your safety first, utilizing proven technology:

1. Precise electrochemical sensor: Considered the most accurate and durable carbon monoxide detection technology on the home market. It reliably detects even low, but long-lasting, harmful carbon monoxide concentrations that other sensors miss.

2. Piercing 85 dB alarm: When the CO concentration exceeds a safe threshold, the sensor triggers an extremely loud siren (minimum 85 decibels) and a pulsating LED warning light. This signal will easily wake people in adjacent, enclosed rooms from a deep sleep.

3. Large TEST / MUTE button: Allows you to check in seconds whether the alarm and electronics are functioning properly. If the alarm accidentally goes off while you're doing housework, you can quickly silence the siren with the same button.

4. Compact, modern design: The white, minimalist housing blends seamlessly into any bathroom, kitchen, or living room without being unnecessarily conspicuous.

? Technical data and device specifications

• Manufacturer: TechniSat

• Model: CO Sensor 1

• Catalog number: 76-5334-00

• Detected gas: Carbon monoxide (CO) - commonly known as carbon monoxide

• Built-in sensor type: Advanced electrochemical sensor

• Alarm siren volume: 85 dB (at a distance of 3 meters)

• Power supply: Battery-powered (guarantees operation even during power outages)

• Signaling: Acoustic (loud alarm) and optical (LEDs: Power, Alarm, Fault)

• Control button (Test / Mute): Yes

• Low battery indication: Yes (warning well in advance)

• End of life / sensor failure indication: Yes

• Recommended installation locations: Boiler rooms, bathrooms with gas heaters, living rooms with fireplaces, kitchens, hallways next to bedrooms.

• Mounting method: Wall-mounted (very simple, mounting plugs usually included) or can be placed on a flat surface.

? Installation Guide and FAQs

• Where is the best place to mount a carbon monoxide detector to ensure proper operation? Many customers mount carbon monoxide detectors directly under the ceiling (confusing them with smoke detectors).

Carbon monoxide has a density similar to air and mixes evenly with it. Golden Rule: A CO detector should be mounted in a room with a heating appliance, at adult eye level (approx. 1.5 meters from the floor) and approximately 1 to 3 meters from a potential carbon monoxide source.

• Does the detector also detect leaking natural gas (from a stove) or smoke? No. The CO Sensor 1 model is a specialized device dedicated and precisely calibrated exclusively to detect carbon monoxide (CO).

• Don't let the safety of you and your loved ones be left to chance. Invest in a professional TechniSat CO Sensor 1 detector and sleep soundly, knowing that proven technology is watching over you!