SAAB 170 BLACK Black Spray Paint 150ml + Primer 400ml

+ Dedicated acrylic primer for color 400ml

• Base: acrylic resin

• Yield for a 400 ml can: from 1.25-1.75 m2

• Non-adhesive: from 5 to 10 minutes

• Drying time: from 10 to 20 minutes

• hard/ready to coat: after approx. 2 hours

• high temperature resistance: up to 110 degrees Celsius

1. The surface must be thoroughly cleaned and degreased. Fill gaps, scratches, and irregularities with putty, then smooth the repaired surface with 400-grit dry sandpaper. Then apply several thin layers of primer.

2. 2 hours at 20 degrees Celsius). Then smooth with 800-grit wet sandpaper.

3. The repaired element should be cleaned and degreased again. Please remember to leave a few minutes between each coat.

4. About 30 minutes after applying the last layer of basecoat, apply several layers of clearcoat to the repaired area. Finally, you can remove the masking elements. After 24 hours and complete drying, the surface is ready for polishing.

• Base Coat

The product information is provided to the best of our knowledge. Before use, it is recommended to carry out a spray test to assess the product's compliance with expectations. The decision to continue using the varnish rests solely with the user.

The seller acts as an intermediary and is not responsible for the final result achieved by the buyer.

NAME: =Black Capacity: 150ml (autolack), 400ml (base)