LARGE PRIMER-BASE-CLEAR SET (3xSPRAY) BMW 314 HELLROT

BMW 314 HELLROT

✅ Primer Spray 400 ml

✅ Clear coat Spray 400 ml

✅ Degreaser 250 ml

• Base: acrylic resin

• Yield for a 400 ml can: from 1.25-1.75 m2

• Non-adhesive: from 5 to 10 minutes

• Drying time: from 10 to 20 minutes

• Hard/ready to coat: after approx. 2 hours

• High temperature resistance: up to 110 degrees Celsius

STEP BY STEP INSTRUCTIONS

1. The surface must be thoroughly cleaned and degreased. Fill gaps, scratches and irregularities with putty, then smooth the repaired surface with 400-grit dry sandpaper. Then apply several thin layers of primer.

2. Then, smooth it using 800-grit sandpaper, this time while wet.

3. The repaired element should be cleaned and degreased again. Please remember to wait a few minutes between applying subsequent layers.

4. About 30 minutes after applying the last coat of base coat, apply several coats of clear coat to the repaired area. Finally, we can remove the masking elements. After 24 hours and complete drying, the surface is ready for polishing.

• Base Coat

The product information is provided to the best of our knowledge. Before use, it is recommended to carry out a spray test to assess the product's compliance with expectations. The decision to continue using the varnish is solely up to the user.

The seller acts as an intermediary and is not responsible for the final result achieved by the buyer.