RUST CONVERTER NEUTRALIZER Spray 400ml Professional Rust Remover mtn Pro

⭐⭐⭐⭐⭐ Rust Converter 400ml

DOES NOT CONTAIN BLACKS - 100% ACTIVE SUBSTANCE

MTN PRO Rust Converter (rust neutralizer) thanks to its additives turns rust into a primer and improves adhesion between subsequent layers. It creates a waterproof, rust-free, and more corrosion-resistant layer.

Neutralizing primer for rust stains on steel and waterproofing this surface. Creates long-lasting anti-corrosion protection of the surface. Ideal for industrial use and DIY. The product can be overcoated with solvent-based and water-based systems, while maintaining overcoating times.

• Good adhesion to rusted surfaces

• Time-saving surface maintenance

• Easy application and overcoating

• Good adhesion to metals such as steel, aluminum, and galvanized metals.

INSTRUCTIONS FOR USE

1. Clean the most rusty areas with a wire brush.

2. Clean rust dust with alcohol.

4. Shake the spray can very well before use, approximately one minute after hearing the sound of the mixing ball.

5. Apply from a distance of 10-20 cm in thin coats. We recommend 3-4 coats, applying every 10 minutes between coats.

6. Drying time between coats (flash-off time) 15-20 minutes.

7. Recoat time after 2 hours, depending on layer thickness, humidity, and drying temperature. Test a small area to check compatibility between products.

8. Invert the aerosol and press the tip to clear the valve after use. If the nozzle is clogged, replace it with a new one.

9. Do not use on connected equipment and use in well-ventilated areas.

There is a QR code on the packaging with a URL address to an instructional video.

The product is equipped with a tip that allows for spraying with a wide, vertical or horizontal stream.

Product information is provided to the best of our knowledge. Before use, it is recommended to conduct a spray test to assess the product's compliance with expectations. The seller acts as an intermediary and is not responsible for the final result achieved by the buyer.