Frame expansion bolts KPS-FAST-10200S (25)

Frame expansion plugs with countersunk head screw and TX socket

10x200 mm 25 pcs.

Consists of a polyamide sleeve and a galvanized steel screw with a countersunk head and TX socket.

Recommended for fastening wooden and wood-based elements. The countersunk head ensures complete flushness in the fastened element.

The most important parameters

• Model: KPS-FAST-10200S

• Plug size: 10x200 mm

• Maximum usable length: 130 mm

• Packaging: 25 pcs.

• Socket: TX-40

• a sleeve - a plastic element

• a connector - a steel screw with a conical head and a Torx 40 socket

Original Product of the Renowned Company KLIMASWkręt-Met ®

Features and benefits

1. Countersunk head with TX socket

The TX socket guarantees optimal torque transfer, while the countersunk head ensures full penetration of the screw into the fastened element.

2. Thread reduction

Precise screw insertion. Increased expansion force in the second expansion zone.

3. Anti-corrosion protection - zinc flake

Zinc flake is twice as resistant to corrosion as galvanized zinc. The Klimas Wkręt-met laboratory confirmed the excellent quality of the coating through tests in a salt spray chamber (240 hours in a salt spray chamber for zinc flake compared to 120 hours for galvanized zinc).

4. Polyamide sleeve

Better physical and chemical properties than polypropylene or polyethylene.

5. Fire resistance

For the installation of facade systems, the load-bearing capacity of the connector has a sufficient fire resistance of at least 90 minutes (R90). if the design load on one connector NR<0.8kN (without permanent centric load).

Substrates and example applications

B. Solid ceramic brick, silicate

C. Ceramic block,

D. Hollow silicate block,

E. Autoclaved AAC concrete

1. Installation of wooden structures

2. Installation of shop windows

3. Fixing radiators

4. Installation window and door joinery

5. Roof mounting

6. Handrail mounting

These are only example applications.

Frame plug with a countersunk head screw and a TX socket, recommended for mounting wooden and PVC elements (where we want the head to be flush with the mounted element).

• Plastic element - sleeve

• Connector - steel screw

• Easier and faster assembly

• Ready-to-use products without assembly

• No mistakes when selecting the right sleeve for the screw

• [ Dk ] Plug diameter: Ø 10.0 mm

• [ Lk ] Plug length: 200 mm

• [ Tfix ] Max. usable length: 130 mm

• [ Heff ] Anchorage depth: 70 mm

• Plug material: polyamide (nylon)

• Quantity in package: 25 pcs.

• [ Dw ] Screw diameter: Ø 7.0 mm

• [ Lw ] Screw length: 205mm

• Socket type::TX-40

• Screw material:galvanized steel

• Quantity in package: 25 pcs.

European Technical Approval ETA 12/0272

The screws we offer are characterized by the highest quality and can be safely used in construction. We make every effort to ensure that the products delivered to our contractors are safe and adapted to specific tasks.

https://youtu.be/ygTRIj0Ocgw

(copy link and paste into browser window)

• Before installation, identify the substrate in which the fastener will be installed and compare the loads that the fastener will transfer with the load-bearing capacities specified in the Product Data Sheet or the European Technical Assessment.

• The appropriate length of the fastener should be selected so that the expansion zone is located in the wall construction material (the thickness of the fastened element corresponds to the maximum usable length of the fastener).

• The drilling hole depth should be at least 10 mm longer than the anchoring depth of the fastener - this will allow for the correct insertion of the sleeve in the hole and will eliminate the problem of screwing out.

• The use of impact is not recommended when drilling in perforated bricks, ceramic blocks and aerated concrete, which destroys the walls and does not provide reliable embedding the connector.

• The diameter of the drilled holes should match the diameter of the dowels used.

• The drilled hole should be cleaned, at least by passing the drill twice, which will remove the drilling dust. Holes drilled vertically downwards require deeper drilling or blowing out the accumulated drilling dust.

• The dowel is inserted into the drilled hole and the screw is screwed in until it is fully embedded in the sleeve.

• Forcing the screw may cause it to loosen, which is not covered by the manufacturer's warranty.

• Installation should be performed at a temperature between -20 °C and +40 °C (referring to the substrate temperature).

KLIMAS screws - the most common choice of professionals

*the measuring tape is not included in the set (it is only used for better presentation of the screws)

Size: S