Screws for fastening plasterboards to wooden substrates
4.2x90 mm 250 pcs.
KSGD screws are made of phosphated steel, have a countersunk head with a PH-2 socket.
Used for fastening plasterboards to substrates made of solid wood, glued wood and wood-like panels.
The most important parameters
• Model: KSGD-42090
• Size: 4.2x90 mm
• Packaging: 250 pcs.
• Socket: PH-2
• Material: low-carbon phosphated steel
Original product of the renowned company KLIMAS Wkręt-Met ®
Features and benefits
1. PH-2 socket
One of the most common sockets, enables installation using tips with a limiter.
2. Countersunk head
Ensures proper penetration in the fastened element.
3. Wood thread and sharp tip
The thread design guarantees secure and durable fastening - both in wooden and wood-based substrates. The sharp tip makes it easier to start installation.
4. Pull-out strength
5.5 times higher pull-out strength than standard requirements.
5. Short screwing time
The plasterboard screws are made of carbon steel with a special phosphate coating. The screws have a countersunk flat head, which ensures proper recessing in the fastened element, and a steel thread with a sharp tip, which ensures durable and secure fastening in the wooden substrate and makes it easier to start installation.
The screw head has a PH-2 recess, which allows installation using tips with an anchoring depth limiter.
Substrates and sample applications
1. Solid wood
2. Glued solid wood
3. Boards wood-like
• [ dw ] screw diameter: Ø 4.2 mm
• [ Lw ] screw length: 90mm
• socket: PH-2
• number of pieces in the package: 250
• screw material: phosphated low-carbon steel
• substrate - chipboard, plywood, wood, OSB board, MDF board
• screws made in accordance with the standard PN-EN 14566
The screws we offer are characterized by the highest quality and can be safely used in construction. We make every effort to ensure that the products delivered to our contractors are safe and adapted to specific tasks.
1. Only original screws supplied by the manufacturer may be used.
2. Before installation, identify the substrate in which the screw will be installed and compare the loads that the screw will transfer with the load-bearing capacity.
3. The appropriate screw length should be selected, depending on the thickness of the plasterboard being mounted.
4. The recommended distance from the edge of the substrate (at least 1.5 cm) and the axial distances between the screws should be maintained. screws (no longer than 25 cm).
5. The screws are attached using a cordless screwdriver or a manual screwdriver, without first making a pilot hole.
6. The screw head should be slightly recessed into the plasterboard. An incorrectly inserted screw (too shallow, too deep or crooked) should be removed and mounted in a different place.
KLIMAS screws - the most common choice of professionals
*the tape measure is not part of the auction (it is only used for better presentation of the screws)
Special thread profile minimizes screwing time: 2.5 times shorter than standard requirements.
Товар из Польши
Возврат по недоставке
