Lanberg 5x 1Gb Unmanaged PoE+ Switch (4 PoE ports, 30W/port, max 60W) Desktop

Lanberg DSP3-1005-60W is a small, unmanaged desktop PoE+ switch, equipped with 5 Gigabit Ethernet ports, including 4 PoE with a real 60W PoE budget for end devices in this standard. This extremely handy device operates based on the Plug-and-Play principle.

The switch supports the switching function for 5 RJ-45 10/100/1000 Mbps ports with auto-negotiation and MDI-MDIX support.

The DSP3 is characterized by the use of an external power supply enabling the switch to operate in PoE/PoE+ mode and the use of the IEEE 802.3af and IEEE 802.3at standards. The Lanberg switch is ideal for home environments, thanks to its very small size (like the DSP2 version) and the use of passive cooling.

The black color and elegant slim housing make the device fit almost any interior. The device is adapted for office applications, including SOHO and SMB. It will also undoubtedly be used in the field of monitoring, CCTV, alarms, security and IT.

The switch also provides adequate performance, meeting the requirements of users in the switching segment. Main functions:

Intelligent port disconnection function when the PoE budget is exceeded. Whenever the budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE+ ports, starting from the highest number, down to the smaller ones, until the sum of the loads does not exceed the available budget, while maintaining the intact operation of the remaining ports.

Those that are disconnected will be permanently disabled and enabled.

Automatic recognition and matching function to the type of network cable being connected (straight or Crossover), eliminates the need for only one type of cabling, as well as Uplink ports, allowing for a simultaneous reduction of unnecessary costs.

The switch supports half-duplex and full-duplex modes for connections between devices. The Flow control function allows for data flow control, thus avoiding port congestion in the event that one of the receiving devices is unable to receive a sufficient amount of received data.

• 5 RJ-45 10/100/1000 Mbps ports with automatic connection negotiation,

• 60 W of real, total PoE budget,

• PoE+ ports: 4x (1 ~ 4),

• Uplink ports: 1x (5th port),

• Support for PoE standards: IEEE 802.3af (15 W), IEEE 802.3at (30 W),

• Plug-and-Play - device does not require any additional configuration,

• Support for MDI/MDIX, MAC-learning, MAC-aging functionalities,

• Flow control function: back pressure @ half-duplex and IEEE 802.3x @ full duplex,

• Topology: Star,

• Protocol: CSMA/CD,

• MAC address table support: 2K,

• Switching capacity: 10 Gbps,

• Passive cooling ensures quiet switch operation,

• Wall mounting holes.

• Power supply: external (AC: 100 ~ 240 V, 50/60 Hz, 1.8 A; DC: 53 V, 1.12 A),

• Switch: 48 V ~ 57 V, max. 3 A,

• Power consumption: max. 65 W,

• LED indicators: Power, LAN ports (Link/Act/PoE+).