Hunter PGV irrigation collector 4 sections with filter and drain valve for PE 32 pipe
Hunter Irrigation Set for 4 Sections - The Perfect Solution For Your Garden!
Take care of the proper irrigation of your garden using the complete Hunter irrigation set. This kit will not only make it easier for you to install your irrigation system, but also ensure its efficiency and reliability.
⭐4 Hunter PGV solenoid valves without flow regulation:
• Reputable Hunter solenoid valves that guarantee durability and reliable operation in various conditions.
⭐Watermil 1" Filter:
• Anti-sand filter from Watermil, ensuring water purity and protecting nozzles from contamination.
⭐Compressor Connection/Irrigation Drain Valve:
• Enables quick and effective purging of stagnant water from the system before winter, protecting it from possible damage.
⭐4 Swivel Collector Tees:
• Flexible Tees enable free connections between collector elements, adapting the irrigation system to individual needs.
⭐2 Swivel Collector Elbows:
• Ensure efficient and flexible construction of the pipeline system.
⭐4 PE 32-1"M Connectors with External Thread and 1 PE 32-1"F Connector with Internal Thread:
• Connecting elements that facilitate the assembly and connection of individual collector components.
• PE Pipe Diameter: 32mm
Choose a Hunter irrigation set and enjoy an effective and reliable irrigation system for your garden!
Assembly of the entire manifold does not require the use of any tools!! Just use your hands :)
⚡ The manifold should be assembled according to the diagram as in the picture above.
⚡Threaded connections between solenoid valves and output connectors as well as solenoid valves and manifold tees should be protected with Teflon, i.e. wrapped with the attached tape. Teflon tape, making about 16 wraps on each threaded connector.
⚡The compressor connection is already Teflon-coated by us!! All you need to do is tighten it all the way.
⚡We'll give you the Teflon tape needed to protect the collector against possible leaks for FREE!!
NOTE!! The collector connectors (tees and elbows) used in the collectors are always from the same company (Tavlit, Irritec or Elysee - depending on availability).
Each collector will consist of tees and elbows from the same company!!