Set of 7 sections Hunter PGV Filter Controller X2 Rain Sensor and 2 PE 32 wells
Hunter X2 801-E Irrigation Set for 7 Sections with Rain Sensor and Rainworks Standard Wells
We offer an irrigation set from the renowned Hunter brand that will meet the highest expectations Your garden.
This advanced 7-station kit has been carefully composed, integrating the latest Hunter technologies, ensuring precise and efficient irrigation.
Here's what this comprehensive kit includes:
☀️Hunter 7-Station Manifold with PGV-100 Solenoid Valves:
• ➡️The manifold equipped with 7 Hunter PGV-100 solenoid valves ensures even irrigation on each section.
• ➡️The 1" Watermil filter protects the system from contamination, ensuring long-lasting efficiency.
☀️Hunter X2 801-E Controller:
• ➡️Advanced Hunter X2 Controller 801-E enables precise irrigation programming, tailored to the individual needs of plants.
• ➡️Intuitive use of the dial and the possibility of remote management using the Hunter WAND WiFi module.
☀️Hunter Rainclik Rain Sensor:
• ➡️The Hunter Rainclik rain sensor/irrigation switch provides intelligent irrigation management by turning the system off during rainfall.
☀️2 Rainworks Standard Manholes:
• ➡️Rainworks Standard solenoid valve manholes are solid housings for solenoid valves, protecting them from weather conditions and facilitating maintenance.
• The set is adapted to PE pipes with a diameter of 32 mm, which ensures easy and reliable connection.
• Hunter's advanced technologies guarantee effective irrigation, adapted to weather conditions.
Choose the Hunter X2 801-E kit that will provide reliable irrigation.
X2 801 E Irrigation Controller from Hunter - A New Era in Irrigation Management
Discover advanced irrigation possibilities with the new X2 801 E controller from Hunter, the perfect successor to popular models X-Core™. This modern controller combines reliability with advanced features, while offering ease of use and modern management.
☘️Wi-Fi Support:
• The X2 801 E controller allows you to remotely manage your irrigation via Wi-Fi. Now control of your garden is at your fingertips with an app on your smartphone or computer.
☘️Advanced Water Saving Features:
• With Hydrawise software, you can achieve maximum water savings by automatically adjusting irrigation schedules to local weather conditions.
☘️Simple Diagnostics with QuickCheck™:
☘️Flexible Programs:
• Three programs, each with four start times and the ability to set a run time of up to 6 hours, allow you to tailor your irrigation to your individual needs.
☘️Safety Features:
• Short-circuit protection, the ability to suspend irrigation during the off-season, and Easy Retrieve memory – all this ensures safe and efficient operation of the irrigation system.
☘️Exceptional Design:
• The backlit display guarantees optimal visibility in all lighting conditions.
☘️Dimensions:
• Height: 23 cm
• Width: 19 cm
• Depth: 10 cm
New X2 Controller The 801 E takes irrigation management to a new level – intelligent, efficient, and easy to use. Discover how you can enhance your gardening experience!
Hunter RAIN CLIK Rain Sensor – Intelligent Irrigation Management!
❗️Forget about wasting water during the rain! The RAIN CLIK rain sensor from Hunter is an innovative solution with the Quick Response™ function, which instantly stops irrigation at the first drops of rain.
❗️Traditional rain sensors wait for the appropriate amount of rainfall to accumulate before stopping irrigation. However, this can lead to excessive water consumption. With Quick Response technology, Rain-Clik sensors immediately transmit information to the controller, eliminating unnecessary watering.
❗️Key Benefits:
• ✴️Quick Response: Instantly shuts off irrigation when it starts to rain or when the temperature drops below 3°C.
• ✴️Adjustable Vent Rings: Adjust reset time for shorter or longer intervals.
• ✴️Durable Construction: Durable polycarbonate housing and metal boom arm ensure reliability and durability.
• ✴️Versatile: Compatible with most irrigation controllers, both normally open and normally closed.
❗️Rain-Clik Sensor Installation It's simple – you can place it on an eaves, wall, or fence. Choose smart irrigation management with the RAIN CLIK rain sensor from Hunter! Save water while protecting your green space.
Hunter 7-Section Collector with Filter and Compressor Connection - Perfect Irrigation of Your Garden!
Ensure effective irrigation for your garden thanks to the 7-section collector from the renowned Hunter brand.
❇️The set includes:
☑️PGV-100 solenoid valves without flow regulation (7 pieces) - brand Hunter:
• They provide reliable irrigation control for each section.
☑️1" Anti-sand Filter - brand Watermil:
• Effectively stops dirt, protecting the system from damage.
☑️Compressor Connection:
• Allows you to connect a compressor to quickly blow out the system before the onset of winter.
☑️Swivel Collector Tees (7 pieces) and Swivel Collector Elbows (2 pieces):
• Provide convenient connections between components.
☑️32-1" Connectors (10 pieces):
• Enable easy connections between solenoid valves and PE pipe.
❇️Additional Information:
• PE Pipe Diameter:32 mm
Check also our other auctions, where collectors for pipe diameters of 20 and 25 mm are available. We offer comprehensive irrigation solutions tailored to your needs!
Assembling the entire collector doesn't require any tools!! Just use your hands :)
⚡ The collector should be assembled according to the diagram as in the photo above.
⚡Threaded connections between solenoid valves and output connectors, as well as solenoid valves and collector tees, should be protected with Teflon, i.e. wrapped with the included Teflon tape, making about 16 turns on each threaded connector.
⚡The compressor connection is already Teflon-coated by us!! Just tighten it all the way.
⚡We'll give you the Teflon tape needed to protect the collector against possible leaks for FREE!!
ATTENTION!! The collector connectors (tees and elbows) used in the collectors are always from the same company (Tavlit, Irritec, or Elysee - depending on availability)
Each collector will consist of tees and elbows from the same company!!
RainWorks Standard Solenoid Valve Well – Reliability and Functionality in One!
Are you looking for a reliable solenoid valve well for your irrigation system? This is the RainWorks Standard Solenoid Valve Manhole – a product from a renowned company, combining solid construction with ease of use.
⭐Up to 4 Solenoid Valves:
• The manhole is designed to operate up to 4 solenoid valves, allowing for comprehensive irrigation control in your garden.
⭐Comfortable Handle on the Cover:
⭐Original Product, High Quality:
• The manhole comes from the renowned manufacturer RainWorks, guaranteeing reliability and durability.
• Dimensions of the Cover: 400x275mm
• Base Dimensions: 520x390mm
• Pit Height: 325mm