Minwax® Wood Finish™ Oil-Based Wood Stain. This easy-to-use, premium product is made in the USA! Minwax® Wood Finish™ is a penetrating, oil-based stain that delivers beautiful, rich color that enhances the natural grain of the wood.
It applies easily, absorbs deeply into the pores of the wood, and is ideal for staining unfinished wood furniture, cabinets, doors, moldings, moldings, and hardwood floors. This penetrating, oil-based stain delivers beautiful, rich color that enhances the natural grain of the wood.
It applies easily, absorbs deeply into the pores of the wood, and is ideal for staining unfinished wood furniture, cabinets, doors, moldings, moldings, and hardwood floors. Before applying Minwax® Wood Finish™ Oil-Based Wood Stain, we recommend using Minwax® Pre-Stain Wood Conditioner.
Controlling exposure to lead or other hazardous substances requires the use of appropriate protective equipment, such as a properly fitted (NIOSH approved) respirator, and proper containment and cleanup.
Wood Preparation Steps: 1. Sand the wood in the direction of the grain, first using 120-grit sandpaper, then finishing with 220-grit sandpaper. This will help the stain absorb evenly. 3. Test stain on an inconspicuous area of the wood to check the color.
3. Wipe off excess stain, working with the wood fibers to blend lighter and darker areas. The longer you wait, the darker/richer the color. 4. To lighten any color, add Minwax® Wood Finish™ color 209 Clear to the stain.
5. To darken the color, apply another coat. DO NOT sand between coats. If you are satisfied with the color, allow it to dry completely before applying a protective topcoat. Product Application Steps: 1.
Apply stain in the direction of the grain with a brush or cloth. 2. Allow the stain to penetrate the wood for 5-15 minutes to achieve the desired color. 3. Remove excess stain with a clean cloth. Wipe in the direction of the grain, blending light and dark areas to achieve a uniform color.
4. To darken the color, apply a second coat after 4-6 hours in the same direction as the first coat. 5. Drying time can be extended by increased humidity, low temperatures, and insufficient ventilation.
6. Finish each project with a clear protective topcoat such as Minwax Fast-Dry Polyurethane or Minwax Polycrylic Protective Finish. After at least 8 hours, apply a fast-drying clear finish such as Minwax® Fast-Drying Polyurethane or Minwax® Helmsman® Spar Urethane.
Tools used: Brush, cloth, foam applicator. Application: Interior wood surfaces. Recoat: 4-6 hours. Drying time: 8 hours. Cleanup: Turpentine. Coverage: 14 square meters per liter. Number of coats: Standard 2.
Larger amounts can be used to achieve a richer color. Recommended use: Furniture, joinery, doors, floors, cabinets, accessories.
Товар из Польши
Возврат по недоставке
